Send Email
Send SMS
Search
Tradewell Ferromet Private Limited


Duplex Stainless Steel DSS Bars

Leading Wholesaler of duplex 329 round bars, din 1.4460 , uns s32900 round bars, astm a182 f51 duplex steel round bars, uns s31803 duplex stainless steel round bars uns s31803 rods, uns s32205 duplex steel round bars, 2205 duplex stainless steel 2205 round bar duplex 2205 rods and x2crnimon22-5-3 duplex steel round bars from Mumbai.

Duplex 329 Round Bars, DIN 1.4460 , UNS S32900 Round Bars

REQUEST CALLBACK

Duplex 329 Round Bars, DIN 1.4460 , UNS S32900 Round Bars
Approx. Rs 350 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity100 Kilogram
Thickness/Diameter1-2 inch, 2-3 inch, 3-4 inch, >4 inch
BrandJayant
Material GradeDuplex 329, DIN 1.4460, UNS S32900
ApplicationManufacturing, Construction, School/College Workshop
Single Piece Length3 meter, 6 meter

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Duplex Stainless Steel (DSS) 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars

329 is a Duplex Alloy stainless. It is slightly lower in alloy content than Alloy 2205, so it is less expensive, however its availability is limited to full mill runs.

Duplex 329 has very good resistance to stress corrosion cracking in chloride environments. The grade has also good resistance to general corrosion in acidic media, thanks to the high chromium content and alloying with molybdenum

Duplex Stainless Steel (DSS) 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer Duplex Stainless Steel (DSS) 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars in size range of 30mm upto 150mm in diameter.

Chemical composition of Duplex Stainless Steel (DSS) 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars:
Chromium, Cr: 28
Nickel, Ni: 4.5
Manganese, Mn: 2
Molybdenum, Mo: 1.5
Silicon, Si: 1
Carbon, C: 0.10
Phosphorous, P: 0.040
Sulfur, S: 0.030

Other possible products of Duplex Stainless Steel 329 are as follows:

Duplex 329 Rods, Duplex 329 Blooms, Duplex 329 Billets, Duplex 329 Bars, Duplex 329 Round Bars, Duplex 329 Flat Bars, Duplex 329 Round Corner Square Bars, Duplex 329 RCS Bars, Duplex 329 Straight Corner Square Bars, Duplex 329 SCS Bars, Duplex 329 Square Bars, Duplex 329 Rectangular Bars, Duplex 329 Hexagonal Bars, Duplex 329 Forged Bars, Duplex 329 Rolled Bars, Duplex 329 Black Bars, Duplex 329 Bright Bars, Duplex 329 Proof Machined Bars, Duplex 329 Hollow Bars, Duplex 329 Normalized Bars, Duplex 329 Annealed Bars, Duplex 329 Hardened (Quenched) & Tempered Bars, Duplex 329 Blocks, Duplex 329 Slabs, Duplex 329 Circles, Duplex 329 Patta, Duplex 329 Flanges, Duplex 329 Slip-On Flanges, Duplex 329 Weld Neck Flanges, Duplex 329 Blind Flanges, Duplex 329 Socket Weld Flanges, Duplex 329 Threaded Flanges, Duplex 329 Lap Joint Flanges, Duplex 329 Long Welding Neck Flanges, Duplex 329 Plate Flanges, Duplex 329 Raised Face Flanges, Duplex 329 Flat Face Flanges, Duplex 329 Ring Type Joint Flanges, Duplex 329 RF Flanges, Duplex 329 FF Flanges, Duplex 329 RTJ Flanges, Duplex 329 Plates, Duplex 329 Custom Profiles, Duplex 329 Plate Shapes, Duplex 329 Fitting, Duplex 329 Elbow, Duplex 329 45 Degree Elbow, Duplex 329 90 Degree Elbow, Duplex 329 180 Degree Elbow, Duplex 329 Reducer, Duplex 329 Eccentric Reducer, Duplex 329 Concentric Reducer, Duplex 329 Sleeve, Duplex 329 Union, Duplex 329 Forgings, Duplex 329 Machined Parts, Duplex 329 Shafts.

Client can buy smaller quantities of Duplex Steel 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for Duplex Stainless Steel  (DSS) 329 Round Bars / DIN 1.4460 Round Bars / UNS S32900 Round Bars kindly do contact us.

Yes! I am interested

ASTM A182 F51 Duplex Steel Round Bars

REQUEST CALLBACK

ASTM A182 F51 Duplex Steel Round Bars
Approx. Rs 295 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity500 Kilogram
Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
Test CertificateNABL Government approved laboratory reports can be provided.
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 260mm
BrandImported, Jayant
Material GradeASTM A182 F51
ApplicationManufacturing, Construction, School/College Workshop
Single Piece Length3 meter, 6 meter

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars.

 

ASTM A182 F51 Duplex Stainless Steel (DSS) also has good erosion fatigue properties as well as lower thermal expansion and higher thermal conductivity than austenitic steels. The yield strength is about twice that of austenitic stainless steels, allowing a designer to save weight and make the alloy more cost competitive when compared to Alloy 316L or Alloy 317L. 

 

ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars in size range of 5mm upto 230mm in diameter.

 

Chemical composition of ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars:

Element: Percentage

Carbon, C: 0.30 max 
Chrome, Cr:
 21.0-23.0
Manganese, Mn: 2.00 max
Molybdenum, Mo: 2.50-3.50
Nitrogen, N: 0.08-0.20
Nickel, Ni: 4.50-6.50
Phosphorus, P: 0.030 max
Sulfur, S: 0.020 max
Silicon, Si: 1.00 max

 

Other possible products of Duplex Stainless Steel (DSS) ASTM A182 F51 are as follows:

ASTM A182 F51 Rods, ASTM A182 F51 Blooms, ASTM A182 F51 Billets, ASTM A182 F51 Bars, ASTM A182 F51 Round Bars, ASTM A182 F51 Flat Bars, ASTM A182 F51 Round Corner Square Bars, ASTM A182 F51 RCS Bars, ASTM A182 F51 Straight Corner Square Bars, ASTM A182 F51 SCS Bars, ASTM A182 F51 Square Bars, ASTM A182 F51 Rectangular Bars, ASTM A182 F51 Hexagonal Bars, ASTM A182 F51 Forged Bars, ASTM A182 F51 Rolled Bars, ASTM A182 F51 Black Bars, ASTM A182 F51 Bright Bars, ASTM A182 F51 Proof Machined Bars, ASTM A182 F51 Hollow Bars, ASTM A182 F51 Normalized Bars, ASTM A182 F51 Annealed Bars, ASTM A182 F51 Hardened (Quenched) Tempered Bars, ASTM A182 F51 Blocks, ASTM A182 F51 Slabs, ASTM A182 F51 Circles, ASTM A182 F51 Patta, ASTM A182 F51 Forgings, ASTM A182 F51 Machined Parts, ASTM A182 F51 Shafts, ASTM A182 F51 Pipes, ASTM A182 F51 Seamless Pipes, ASTM A182 F51 Heavy Wall Thickness Pipes, ASTM A182 F51 Tube, ASTM A182 F51 Rings, ASTM A182 F51 Forged Rings, ASTM A182 F51 Seamless Rings, ASTM A182 F51 Rolled Rings, ASTM A182 F51 Seamless Forged Rings, ASTM A182 F51 Seamless Rolled Rings, ASTM A182 F51 Welded Rings, ASTM A182 F51 Forged Welded Rings.

 

Client can buy smaller quantities of ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for ASTM A182 F51 Duplex Steel Bars / ASTM A182 F51 Round Bars kindly do contact us.


Additional Information:

  • Item Code: astm-a182-f51-duplex-steel-bars-astm-a182-f51-round-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    UNS S31803 Duplex Stainless Steel Round Bars UNS S31803 Rods

    REQUEST CALLBACK

    UNS S31803 Duplex Stainless Steel Round Bars UNS S31803 Rods
    Approx. Rs 350 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 300mm
    BrandJayant Impex(JIPL), Imported
    Material GradeUNS S31803, Duplex Steel UNS S31803, Duplex UNS S31803 Steel, Stainless Steel UNS S31803, UNS S31803
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet can offer UNS S31803 Duplex Stainless Steel Round Bars, UNS S31803 Rods, UNS S31803 Bar, UNS S31803 Flat Bars, UNS S31803 Rectangular Bar, UNS S31803 Duplex rods, UNS S31803 Duplex Stainless Steel Rods.

    UNS S31803 is a 22% Cr duplex stainless steel, supplied in the solution annealed condition. As a duplex stainless steel, it combines the desirable aspect of properties of both austenitic and ferritic grades. The high chromium, molybdenum and nitrogen contents results in a Pitting Resistance Equivalent number (PREN) of 33-34, providing pitting and crevice corrosion resistance superior to Alloy 316L or Alloy 317L austenitic stainless steels in almost all corrosive media. Due to its excellent corrosion properties, it is well-suited to environments containing chlorides and hydrogen sulphide, for use in oil gas extraction from sour wells, in refineries and in process solutions contaminated with chlorides.

    UNS S31803 Duplex Steel Bars / UNS S31803 Duplex Steel Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

    Size Specifications: Can offer UNS S31803 Duplex Steel Bars / UNS S31803 Duplex Steel Round Bars in size range of 6mm upto 210mm in diameter.

    Chemical composition of UNS S31803 Duplex Steel Bars / UNS S31803 Duplex Steel Round Bars:

    Element: Percentage

    C: 0.30 max
    Cr:
    21.0-23.0
    Mn: 2.00 max
    Mo: 2.50-3.50
    N: 0.08-0.20
    Ni: 4.50-6.50
    P: 0.030 max
    S: 0.020 max
    Si: 1.00 max

    Other possible products of Duplex Stainless Steel (DSS) UNS S31803 are as follows:

    UNS S31803 Rods, UNS S31803 Blooms, UNS S31803 Billets, UNS S31803 Bars, UNS S31803 Round Bars, UNS S31803 Flat Bars, UNS S31803 Round Corner Square Bars, UNS S31803 RCS Bars, UNS S31803 Straight Corner Square Bars, UNS S31803 SCS Bars, UNS S31803 Square Bars, UNS S31803 Rectangular Bars, UNS S31803 Hexagonal Bars, UNS S31803 Forged Bars, UNS S31803 Rolled Bars, UNS S31803 Black Bars, UNS S31803 Bright Bars, UNS S31803 Proof Machined Bars, UNS S31803 Hollow Bars, UNS S31803 Normalized Bars, UNS S31803 Annealed Bars, UNS S31803 Hardened (Quenched) Tempered Bars, UNS S31803 Blocks, UNS S31803 Slabs, UNS S31803 Circles, UNS S31803 Patta, UNS S31803 Forgings, UNS S31803 Machined Parts, UNS S31803 Shafts, UNS S31803 Pipes, UNS S31803 Seamless Pipes, UNS S31803 Heavy Wall Thickness Pipes, UNS S31803 Tube, UNS S31803 Rings, UNS S31803 Forged Rings, UNS S31803 Seamless Rings, UNS S31803 Rolled Rings, UNS S31803 Seamless Forged Rings, UNS S31803 Seamless Rolled Rings, UNS S31803 Welded Rings, UNS S31803 Forged Welded Rings.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India Client can buy smaller quantities of UNS S31803 Duplex Stainless Steel Round Bars, UNS S31803 Rods, UNS S31803 Bar, UNS S31803 Flat Bars, UNS S31803 Rectangular Bar, UNS S31803 Duplex rods, UNS S31803 Duplex Stainless Steel Rods online from our associated manufacturing unit in India at premium cost.

    If any requirements for UNS S31803 Duplex Stainless Steel Round Bars, UNS S31803 Rods, UNS S31803 Bar, UNS S31803 Flat Bars, UNS S31803 Rectangular Bar, UNS S31803 Duplex rods, UNS S31803 Duplex Stainless Steel Rods kindly do contact us.


    Additional Information:

  • Item Code: s31803-duplex-steel-bars-s31803-duplex-steel-round-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    UNS S32205 Duplex Steel Round Bars

    REQUEST CALLBACK

    UNS S32205 Duplex Steel Round Bars
    Approx. Rs 321 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 300mm
    BrandImported, Jayant
    Material GradeUNS S32205
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars.

    UNS S32205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking. The combination of chromium, molybdenum and nitrogen convey the good resistance of UNS 32205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of UNS S32205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.

     

    UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars in size range of 5mm upto 240mm in diameter.

     

    Chemical composition of UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars:

    Element: Percentage

    Carbon, C: .030 Max

    Nickel, Ni: 4.50-6.50

    Molybdenum, Mo: 3.00-3.50

    Chrome, Cr: 22.0-23.0

    Nitrogen, N: 0.14-0.20

    Manganese, Mn: 2.00 Max

    Silicon, Si: 1.00 Max

    Phosphorus, P: .030 Max

    Sulfur, S: .020 Max

    Iron, Fe: Balance

     

    Other possible products of Duplex Stainless Steel (DSS) UNS S32205 are as follows:

    UNS S32205 Rods, UNS S32205 Blooms, UNS S32205 Billets, UNS S32205 Bars, UNS S32205 Round Bars, UNS S32205 Flat Bars, UNS S32205 Round Corner Square Bars, UNS S32205 RCS Bars, UNS S32205 Straight Corner Square Bars, UNS S32205 SCS Bars, UNS S32205 Square Bars, UNS S32205 Rectangular Bars, UNS S32205 Hexagonal Bars, UNS S32205 Forged Bars, UNS S32205 Rolled Bars, UNS S32205 Black Bars, UNS S32205 Bright Bars, UNS S32205 Proof Machined Bars, UNS S32205 Hollow Bars, UNS S32205 Normalized Bars, UNS S32205 Annealed Bars, UNS S32205 Hardened (Quenched) Tempered Bars, UNS S32205 Blocks, UNS S32205 Slabs, UNS S32205 Circles, UNS S32205 Patta, UNS S32205 Forgings, UNS S32205 Machined Parts, UNS S32205 Shafts, UNS S32205 Pipes, UNS S32205 Seamless Pipes, UNS S32205 Heavy Wall Thickness Pipes, UNS S32205 Tube, UNS S32205 Rings, UNS S32205 Forged Rings, UNS S32205 Seamless Rings, UNS S32205 Rolled Rings, UNS S32205 Seamless Forged Rings, UNS S32205 Seamless Rolled Rings, UNS S32205 Welded Rings, UNS S32205 Forged Welded Rings.

     

    Client can buy smaller quantities of UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars online from our associated manufacturing unit in India at premium cost.

    If any requirements for UNS S32205 Duplex Steel Bars / UNS S32205 Duplex Steel Round Bars kindly do contact us.


    Additional Information:

  • Item Code: s32205-duplex-steel-bars-s32205-duplex-steel-round-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    2205 Duplex Stainless Steel 2205 Round bar Duplex 2205 Rods

    REQUEST CALLBACK

    2205 Duplex Stainless Steel 2205 Round bar Duplex 2205 Rods
    Approx. Rs 311 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 350mm
    BrandJayant Impex(JIPL), Imported (European Origin)
    Material Grade2205, 2205 Steel, Duplex 2205, Stainless Steel 2205, Duplex Steel 2205, AISI 2205, SAE 2205
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet can offer 2205 Duplex Stainless Steel 2205 Round bar Duplex 2205 Rods, 2205 Duplex Steel Bars, 2205 Round Bars, Duplex 2205 Bars, 2205 Flat Bar, 2205 Square bar, 2205 rectangular bars.

    Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. Usage of 2205 Duplex stainless steel should be limited to temperatures below 600° F. Extended elevated temperature exposure can embrittle 2205 stainless.

    2205 Duplex Steel Bars / Duplex 2205 Round Bars / 2205 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

    Size Specifications: Can offer 2205 Duplex Steel Bars / Duplex 2205 Round Bars / 2205 Bars in size range of 6mm upto 280mm in diameter.

    Chemical composition of 2205 Duplex Steel Bars / Duplex 2205 Round Bars / 2205 Bars:

    Element: Percentage

    Cr: 22.0-23.0

    Ni: 4.50-6.50

    Mo: 3.00-3.50

    C: .030 Max

    N: 0.14-0.20

    Mn: 2.00 Max

    Si: 1.00 Max

    P: .030 Max

    S: .020 Max

    Fe: Balance

    Other possible products of Duplex Stainless Steel (DSS) 2205 are as follows:

    Duplex 2205 Rods, Duplex 2205 Blooms, Duplex 2205 Billets, Duplex 2205 Bars, Duplex 2205 Round Bars, Duplex 2205 Flat Bars, Duplex 2205 Round Corner Square Bars, Duplex 2205 RCS Bars, Duplex 2205 Straight Corner Square Bars, Duplex 2205 SCS Bars, Duplex 2205 Square Bars, Duplex 2205 Rectangular Bars, Duplex 2205 Hexagonal Bars, Duplex 2205 Forged Bars, Duplex 2205 Rolled Bars, Duplex 2205 Black Bars, Duplex 2205 Bright Bars, Duplex 2205 Proof Machined Bars, Duplex 2205 Hollow Bars, Duplex 2205 Normalized Bars, Duplex 2205 Annealed Bars, Duplex 2205 Hardened (Quenched) Tempered Bars, Duplex 2205 Blocks, Duplex 2205 Slabs, Duplex 2205 Circles, Duplex 2205 Patta, Duplex 2205 Forgings, Duplex 2205 Machined Parts, Duplex 2205 Shafts, Duplex 2205 Pipes, Duplex 2205 Seamless Pipes, Duplex 2205 Heavy Wall Thickness Pipes, Duplex 2205 Tube, Duplex 2205 Rings, Duplex 2205 Forged Rings, Duplex 2205 Seamless Rings, Duplex 2205 Rolled Rings, Duplex 2205 Seamless Forged Rings, Duplex 2205 Seamless Rolled Rings, Duplex 2205 Welded Rings, Duplex 2205 Forged Welded Rings.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Client can buy smaller quantities of 2205 Duplex Stainless Steel 2205 Round bar Duplex 2205 Rods, 2205 Duplex Steel Bars, 2205 Round Bars, Duplex 2205 Bars, 2205 Flat Bar, 2205 Square bar, 2205 rectangular bars online from our associated manufacturing unit in India at premium cost.

    If any requirements for 2205 Duplex Stainless Steel 2205 Round bar Duplex 2205 Rods, 2205 Duplex Steel Bars, 2205 Round Bars, Duplex 2205 Bars, 2205 Flat Bar, 2205 Square bar, 2205 rectangular bars kindly do contact us.


    Additional Information:

  • Item Code: 2205-Duplex-Stainless-Steel-2205-Round-bar-Duplex-2205-Rods
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    X2CrNiMoN22-5-3 Duplex Steel Round Bars

    REQUEST CALLBACK

    X2CrNiMoN22-5-3 Duplex Steel Round Bars
    Approx. Rs 550 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 260mm
    BrandImported, Jayant
    Material GradeW.Nr.X2CrNiMoN22-5-3
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar.

     

    The high oxidation resistance property of Grade X2CrNiMoN22-5-3 duplex stainless steel is marred by its embrittlement above 300°C. This embrittlement can be modified by a full solution annealing treatment. This grade performs well at temperatures below 300°C. The best suited heat treatment for this grade is solution treatment (annealing), between 1020 - 1100°C, followed by rapid cooling. Grade X2CrNiMoN22-5-3 can be work hardened but cannot be hardened by thermal methods.

     

    X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar in size range of 6mm upto 240mm in diameter.

     

    Chemical composition of X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar:

    Element: Percentage

    C: 0.30 max
    Cr: 22.0-23.0
    Mn: 2.00 max
    Mo: 3.00-3.50
    N: 0.14-0.20 
    Ni: 4.50-6.50
    P: 0.030 max
    S: 0.020 max 

    Si: 1.00 max

     

    Other possible products of Duplex Stainless Steel (DSS) W.Nr. X2CrNiMoN22-5-3 are as follows:

    W.Nr. X2CrNiMoN22-5-3 Rods, W.Nr. X2CrNiMoN22-5-3 Blooms, W.Nr. X2CrNiMoN22-5-3 Billets, W.Nr. X2CrNiMoN22-5-3 Bars, W.Nr. X2CrNiMoN22-5-3 Round Bars, W.Nr. X2CrNiMoN22-5-3 Flat Bars, W.Nr. X2CrNiMoN22-5-3 Round Corner Square Bars, W.Nr. X2CrNiMoN22-5-3 RCS Bars, W.Nr. X2CrNiMoN22-5-3 Straight Corner Square Bars, W.Nr. X2CrNiMoN22-5-3 SCS Bars, W.Nr. X2CrNiMoN22-5-3 Square Bars, W.Nr. X2CrNiMoN22-5-3 Rectangular Bars, W.Nr. X2CrNiMoN22-5-3 Hexagonal Bars, W.Nr. X2CrNiMoN22-5-3 Forged Bars, W.Nr. X2CrNiMoN22-5-3 Rolled Bars, W.Nr. X2CrNiMoN22-5-3 Black Bars, W.Nr. X2CrNiMoN22-5-3 Bright Bars, W.Nr. X2CrNiMoN22-5-3 Proof Machined Bars, W.Nr. X2CrNiMoN22-5-3 Hollow Bars, W.Nr. X2CrNiMoN22-5-3 Normalized Bars, W.Nr. X2CrNiMoN22-5-3 Annealed Bars, W.Nr. X2CrNiMoN22-5-3 Hardened (Quenched) Tempered Bars, W.Nr. X2CrNiMoN22-5-3 Blocks, W.Nr. X2CrNiMoN22-5-3 Slabs, W.Nr. X2CrNiMoN22-5-3 Circles, W.Nr. X2CrNiMoN22-5-3 Patta, W.Nr. X2CrNiMoN22-5-3 Forgings, W.Nr. X2CrNiMoN22-5-3 Machined Parts, W.Nr. X2CrNiMoN22-5-3 Shafts, W.Nr. X2CrNiMoN22-5-3 Pipes, W.Nr. X2CrNiMoN22-5-3 Seamless Pipes, W.Nr. X2CrNiMoN22-5-3 Heavy Wall Thickness Pipes, W.Nr. X2CrNiMoN22-5-3 Tube, W.Nr. X2CrNiMoN22-5-3 Rings, W.Nr. X2CrNiMoN22-5-3 Forged Rings, W.Nr. X2CrNiMoN22-5-3 Seamless Rings, W.Nr. X2CrNiMoN22-5-3 Rolled Rings, W.Nr. X2CrNiMoN22-5-3 Seamless Forged Rings, W.Nr. X2CrNiMoN22-5-3 Seamless Rolled Rings, W.Nr. X2CrNiMoN22-5-3 Welded Rings, W.Nr. X2CrNiMoN22-5-3 Forged Welded Rings.

     

    Client can buy smaller quantities of X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar online from our associated manufacturing unit in India at premium cost.

    If any requirements for X2CrNiMoN22-5-3 Duplex Steel Bars/ X2CrNiMoN22-5-3 Round Bar kindly do contact us.


    Additional Information:

  • Item Code: x2crnimon22-5-3-duplex-steel-bars-x2crnimon22-5-3-round-bar
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    WNr DIN 1.4462 Duplex Stainless Steel Round Bars 1.4462 Rods

    REQUEST CALLBACK

    WNr DIN 1.4462 Duplex Stainless Steel Round Bars 1.4462 Rods
    Approx. Rs 411 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 260mm
    BrandJayant Impex(JIPL), Imported (European Origin)
    Material Grade1.4462 Duplex Stainless Steel, DIN 1.4462, WNr 1.4462, Duplex 1.4462 Steel, Stainless Steel 1.4462
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet can offer WNr DIN 1.4462 Duplex Stainless Steel Round Bars 1.4462 Rods, 1.4462 rods, 1.4462 round bar, 1.4462 bars, 1.4462 Duplex bar, 1.4462 Stainless steel bars, 1.4462 Stainless steel rods, 1.4462 SS bars.

    Grade 1.4462 duplex stainless steel exhibits excellent corrosion resistance, much higher than that of grade 316. It resists localized corrosion types like intergranular, crevice and pitting. The CPT of this type of stainless steel is around 35°C. This grade is resistant to chloride stress corrosion cracking (SCC) at temperatures of 150°C. Grade 2205 stainless steels are apt replacements to austenitic grades, especially in premature failure environments and marine environments.

    DIN 1.4462 Duplex Steel Bars / WNr 1.4462 Duplex Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

    Size Specifications: Can offer DIN 1.4462 Duplex Steel Bars / DIN 1.4462 Duplex Round Bars in size range of 5mm upto 250mm in diameter.

    Chemical composition of 1.4462 Steel:
    Element: Percentage
    Carbon, C: 0.30 max
    Chrome, Cr: 22.0-23.0
    Manganese, Mn: 2.00 max
    Molybdenum, Mo: 3.00-3.50
    Nitrogen, N: 0.14-0.20
    Nickel, Ni: 4.50-6.50
    Phosphorus, P: 0.030 max
    Sulfur, S: 0.020 max
    Silicon, Si: 1.00 max

    Other possible products of Duplex Stainless Steel (DSS) DIN, Wnr 1.4462 are as follows:
    1.4462 Rods, 1.4462 Blooms, 1.4462 Billets, 1.4462 Bars, 1.4462 Round Bars, 1.4462 Flat Bars, 1.4462 Round Corner Square Bars, 1.4462 RCS Bars, 1.4462 Straight Corner Square Bars, 1.4462 SCS Bars, 1.4462 Square Bars, 1.4462 Rectangular Bars, 1.4462 Hexagonal Bars, 1.4462 Forged Bars, 1.4462 Rolled Bars, 1.4462 Black Bars, 1.4462 Bright Bars, 1.4462 Proof Machined Bars, 1.4462 Hollow Bars, 1.4462 Normalized Bars, 1.4462 Annealed Bars, 1.4462 Hardened (Quenched) Tempered Bars, 1.4462 Blocks, 1.4462 Slabs, 1.4462 Circles, 1.4462 Patta, 1.4462 Forgings, 1.4462 Machined Parts, 1.4462 Shafts, 1.4462 Pipes, 1.4462 Seamless Pipes, 1.4462 Heavy Wall Thickness Pipes, 1.4462 Tube, 1.4462 Rings, 1.4462 Forged Rings, 1.4462 Seamless Rings, 1.4462 Rolled Rings, 1.4462 Seamless Forged Rings, 1.4462 Seamless Rolled Rings, 1.4462 Welded Rings, 1.4462 Forged Welded Rings.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India client can buy smaller quantities of WNr DIN 1.4462 Duplex Stainless Steel Round Bars 1.4462 Rods, 1.4462 rods, 1.4462 round bar, 1.4462 bars, 1.4462 Duplex bar, 1.4462 Stainless steel bars, 1.4462 Stainless steel rods, 1.4462 SS bars online from our associated manufacturing unit in India at premium cost.

    If any requirements for WNr DIN 1.4462 Duplex Stainless Steel Round Bars 1.4462 Rods, 1.4462 rods, 1.4462 round bar, 1.4462 bars, 1.4462 Duplex bar, 1.4462 Stainless steel bars, 1.4462 Stainless steel rods, 1.4462 SS bars kindly do contact us.

    Additional Information:

  • Item Code: WNr-DIN-1-4462-Duplex-Stainless-Steel-Round-Bars-1-4462-Rods
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    ASTM A182 F60 Duplex Steel Round Bars

    REQUEST CALLBACK

    ASTM A182 F60 Duplex Steel Round Bars
    Approx. Rs 374 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity500 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 260mm
    BrandImported, Jayant
    Material GradeASTM A182 F60
    ApplicationManufacturing, Construction, School/College Workshop
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars.

     

    ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars in size range of 3mm upto 400mm in diameter.

     

    Chemical composition of ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars:

    Element: Percentage

    C: 0.30 max
    Cr: 22.0-23.0
    Mn: 2.00 max
    Mo: 3.00-3.50
    N: 0.14-0.20 
    Ni: 4.50-6.50
    P: 0.030 max
    S: 0.020 max 

    Si: 1.00 max

     

    Other possible products of Duplex Stainless Steel (DSS) ASTM A182 F60 are as follows:

    ASTM A182 F60 Rods, ASTM A182 F60 Blooms, ASTM A182 F60 Billets, ASTM A182 F60 Bars, ASTM A182 F60 Round Bars, ASTM A182 F60 Flat Bars, ASTM A182 F60 Round Corner Square Bars, ASTM A182 F60 RCS Bars, ASTM A182 F60 Straight Corner Square Bars, ASTM A182 F60 SCS Bars, ASTM A182 F60 Square Bars, ASTM A182 F60 Rectangular Bars, ASTM A182 F60 Hexagonal Bars, ASTM A182 F60 Forged Bars, ASTM A182 F60 Rolled Bars, ASTM A182 F60 Black Bars, ASTM A182 F60 Bright Bars, ASTM A182 F60 Proof Machined Bars, ASTM A182 F60 Hollow Bars, ASTM A182 F60 Normalized Bars, ASTM A182 F60 Annealed Bars, ASTM A182 F60 Hardened (Quenched) Tempered Bars, ASTM A182 F60 Blocks, ASTM A182 F60 Slabs, ASTM A182 F60 Circles, ASTM A182 F60 Patta, ASTM A182 F60 Forgings, ASTM A182 F60 Machined Parts, ASTM A182 F60 Shafts, ASTM A182 F60 Pipes, ASTM A182 F60 Seamless Pipes, ASTM A182 F60 Heavy Wall Thickness Pipes, ASTM A182 F60 Tube, ASTM A182 F60 Rings, ASTM A182 F60 Forged Rings, ASTM A182 F60 Seamless Rings, ASTM A182 F60 Rolled Rings, ASTM A182 F60 Seamless Forged Rings, ASTM A182 F60 Seamless Rolled Rings, ASTM A182 F60 Welded Rings, ASTM A182 F60 Forged Welded Rings.

     

    Client can buy smaller quantities of ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars online from our associated manufacturing unit in India at premium cost.

    If any requirements for ASTM A182 F60 Duplex Steel Bars / ASTM A182 F60 Round Bars kindly do contact us.


    Additional Information:

  • Item Code: astm-a182-f60-duplex-steel-bars-astm-a182-f60-round-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

     
    X


    Call Us: +91-8048601955
    Tradewell Ferromet Private Limited
    Girish Mehta (Marketing Director)
    Shop No. 6, Ground Floor, Mahimwala Building Opposite Sardar High School, Grant Road Station,
    Mumbai - 400004, Maharashtra, India
    Contact via E-mail
    Contact via SMS


    Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

    © Tradewell Ferromet Private Limited. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Tradewell Ferromet Private Limited