Send Email
Send SMS
Search
Tradewell Ferromet Private Limited


Cold Work Tool Steel Bars

Our product range includes a wide range of din 1.2379 cold work tool steel 1.2379 bars, w.nr. x153crmov12 tool steel din x153crmov12 round bar, din 1.2080 cold working tool steel 2080 round bar, jis skd1 cold working tool steel bars, aisi d2 cold working tool steel bars and w.nr. x210cr12 cold working tool steel din x210cr12 bar.

DIN 1.2379 Cold Work Tool Steel 1.2379 Bars

REQUEST CALLBACK

DIN 1.2379 Cold Work Tool Steel 1.2379 Bars
Approx. Rs 246 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity1000 Kilogram
Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
Test CertificateNABL Government approved laboratory reports can be provided.
Size22mm to 452mm
BrandJayant
Material GradeDIN 1.2379
ApplicationConstruction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar / 1.2379 Bars / 1.2379.

DIN 1.2379 steel is Cold Work Tool Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition.DIN 2379 is the superior steels than D3 due to high alloys properties.

DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar / 1.2379 Bars / 1.2379 in size range of 10mm upto 450mm in diameter.

 

Chemical composition of DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar:

Element: Percentage

C: 1.40 – 1.60

Mn: 0.60

Si: 0.60

Co: 1.00

Cr: 11.00 – 13.00

Mo: 0.70 – 1.20

V: 1.10

P: 0.03

Ni: 0.30

Cu: 0.25

S: 0.03

 

Other possible products of Tool Steel DIN 1.2379 are as follows:

DIN 1.2379 Rods, DIN 1.2379 Blooms, DIN 1.2379 Billets, DIN 1.2379 Bars, DIN 1.2379 Round Bars, DIN 1.2379 Flat Bars, DIN 1.2379 Round Corner Square Bars, DIN 1.2379 RCS Bars, DIN 1.2379 Straight Corner Square Bars, DIN 1.2379 SCS Bars, DIN 1.2379 Square Bars, DIN 1.2379 Rectangular Bars, DIN 1.2379 Hexagonal Bars, DIN 1.2379 Forged Bars, DIN 1.2379 Rolled Bars, DIN 1.2379 Black Bars, DIN 1.2379 Bright Bars, DIN 1.2379 Proof Machined Bars, DIN 1.2379 Hollow Bars, DIN 1.2379 Normalized Bars, DIN 1.2379 Annealed Bars, DIN 1.2379 Hardened (Quenched) Tempered Bars, DIN 1.2379 Blocks, DIN 1.2379 Slabs, DIN 1.2379 Circles, DIN 1.2379 Patta, DIN 1.2379 Forgings, DIN 1.2379 Machined Parts, DIN 1.2379 Shafts, DIN 1.2379 Pipes, DIN 1.2379 Seamless Pipes, DIN 1.2379 Heavy Wall Thickness Pipes, DIN 1.2379 Tube.

 

Client can buy smaller quantities of DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar / 1.2379 Bars / 1.2379 online from our associated manufacturing unit in India at premium cost.

 

If any requirements for DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar / 1.2379 Bars / 1.2379kindlydo contact us.


Additional Information:

  • Item Code: din-1-2379-tool-steel-round-bars-din-1-2379-flat-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    W.Nr. X153CrMoV12 Tool Steel DIN X153CrMoV12 Round Bar

    REQUEST CALLBACK

    W.Nr. X153CrMoV12 Tool Steel DIN X153CrMoV12 Round Bar
    Approx. Rs 300 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Size22mm to 350mm
    Thickness/Diameter1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 350mm
    BrandJayant
    Material GradeW.Nr. X155CrVMo12-1
    ApplicationConstruction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry
    Single Piece Length3 meter, 6 meter
    Delivery Details0-2 days, 5 to 8 weeks for make to order basis

    Tradewell Ferromet can offer DIN X153CrVMo12 Tool Steel Round Bars, W.Nr. X153CrVMo12 Flat Bar, W.Nr.X153CrVMo12 Round Bar, DIN X153CrVMo12 Round Bar, X153CrVMo12 Hot Die Steel Bar, X153CrVMo12 Tool Steel Bar, X153CrVMo12 Alloy Steel Bars, Tool Steel, Alloy Steel, Hot Die Steel Bars.

    W.Nr. X153CrVMo12 Tool Steel is used in the making of knife-edge mold, scissors, circular saw blades, metal stamping mold. Used to make cold work or hot work dressing dies, sides of rollers, screw lines, lines dies, transformer core stamping dies, rolled knives, steel tube forming rollers, special molding rollers, screw heading molds, etc. Also used for blanking dies, stamping dies and pressing dies with a thickness ≤ 6mm. It can also be found in the production of various kinds of scissors, inlaid blades and thread rolling dies. It is also used to make wear-resistant slider cold heading dies, deep drawing molding dies, cold extrusion dies and in the making of thermosetting resin molding dies and common plastic dies.

    X153CrVMo12 Tool Steel Round Bars / X153CrVMo12 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish. Size Specifications: Can offer X153CrVMo12 Tool Steel Round Bars / X153CrVMo12 Flat Bars in size range of 3mm upto 400mm in diameter.

    Chemical composition of X153CrVMo12 Tool Steel Round Bars / X153CrVMo12 Flat Bars:
    Element: Percentage
    Carbon, C: 1.40 – 1.60
    Manganese, Mn: 0.60
    Silicon, Si: 0.60
    Cobalt, Co: 1.00
    Chrome, Cr: 11.00 – 13.00
    Molybdenum, Mo: 0.70 – 1.20
    Vanadium, V: 1.10
    Phosphorus, P: 0.03
    Nickel, Ni: 0.30
    Copper, Cu: 0.25
    Sulfur, S: 0.03

    Other possible products of Tool Steel W.Nr. X153CrVMo12 are as follows: W.Nr. X153CrVMo12 Rods, W.Nr. X153CrVMo12 Blooms, W.Nr. X153CrVMo12 Billets, W.Nr. X153CrVMo12 Bars, W.Nr. X153CrVMo12 Round Bars, W.Nr. X153CrVMo12 Flat Bars, W.Nr. X153CrVMo12 Round Corner Square Bars, W.Nr. X153CrVMo12 RCS Bars, W.Nr. X153CrVMo12 Straight Corner Square Bars, W.Nr. X153CrVMo12 SCS Bars, W.Nr. X153CrVMo12 Square Bars, W.Nr. X153CrVMo12 Rectangular Bars, W.Nr. X153CrVMo12 Hexagonal Bars, W.Nr. X153CrVMo12 Forged Bars, W.Nr. X153CrVMo12 Rolled Bars, W.Nr. X153CrVMo12 Black Bars, W.Nr. X153CrVMo12 Bright Bars, W.Nr. X153CrVMo12 Proof Machined Bars, W.Nr. X153CrVMo12 Hollow Bars, W.Nr. X153CrVMo12 Normalized Bars, W.Nr. X153CrVMo12 Annealed Bars, W.Nr. X153CrVMo12 Hardened (Quenched) Tempered Bars, W.Nr. X153CrVMo12 Blocks, W.Nr. X153CrVMo12 Slabs, W.Nr. X153CrVMo12 Circles, W.Nr. X153CrVMo12 Patta, W.Nr. X153CrVMo12 Forgings, W.Nr. X153CrVMo12 Machined Parts, W.Nr. X153CrVMo12 Shafts, W.Nr. X153CrVMo12 Pipes, W.Nr. X153CrVMo12 Seamless Pipes, W.Nr. X153CrVMo12 Heavy Wall Thickness Pipes, W.Nr. X153CrVMo12 Tube.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India Client can buy smaller quantities of DIN X153CrVMo12 Tool Steel Round Bars, W.Nr. X153CrVMo12 Flat Bar, W.Nr.X153CrVMo12 Round Bar, DIN X153CrVMo12 Round Bar, X153CrVMo12 Hot Die Steel Bar, X153CrVMo12 Tool Steel Bar, X153CrVMo12 Alloy Steel Bars, Tool Steel, Alloy Steel, Hot Die Steel Bars online from our associated manufacturing unit in India at premium cost.

    If any requirements for DIN X153CrVMo12 Tool Steel Round Bars, W.Nr. X153CrVMo12 Flat Bar, W.Nr.X153CrVMo12 Round Bar, DIN X153CrVMo12 Round Bar, X153CrVMo12 Hot Die Steel Bar, X153CrVMo12 Tool Steel Bar, X153CrVMo12 Alloy Steel Bars, Tool Steel, Alloy Steel, Hot Die Steel Bars kindly do contact us.

    Additional Information:

  • Item Code: x155crvmo12-1-tool-steel-round-bars-x155crvmo12-1-flat-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    DIN 1.2080 Cold Working Tool Steel 2080 Round Bar

    REQUEST CALLBACK

    DIN 1.2080 Cold Working Tool Steel 2080 Round Bar
    Approx. Rs 235 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Size22mm to 300mm
    Thickness/Diameter1-2 inch, 2-3 inch, 3-4 inch, >4 inch, upto 300mm
    BrandJayant
    Material GradeDIN 1.2080, W.Nr. 1.2080, Tool Steel 1.2080, Alloy Steel 1.2080, Die Steel 2080, 2080 Tool Steel
    ApplicationManufacturing, Construction, School/College Workshop, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry, Die Steel, Tool Dies
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars / 1.2080 Bars / 2080 Round Bar / W.Nr. 1.2080 Bar / W.Nr. 1.2080 Round Bars / 1.2080 Tool Steel Bar / 1.2080 Hot Die Steel Bar / 1.2080 Tool Alloy Steel Bars / Tool Steel / Flat Die Steel / 2080 Flat Bar / 2080 Tool Steel Bar.

    DIN 1.2080 Steel having properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies tools.

    DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars / 1.2080 Bars / 1.2080 Round Bar / W.Nr. 1.2080 Bar / W.Nr. 1.2080 Round Bars / 1.2080 Tool Steel Bar / 1.2080 Hot Die Steel Bar / 1.2080 Tool Alloy Steel Bars / Tool Steel / Flat Die Steel can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

    Size Specifications: Can offer DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars in size range of 22mm upto 400mm in diameter.

    Chemical composition of DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars:

    Element: Percentage

    C: 2.00-2.35

    Mn: 0.60

    Si: 0.60

    Cr: 11.00–13.50

    Ni: 0.30

    W: 1.00

    V: 1.00

    P: 0.03

    S: 0.03

    Cu: 0.25

    Other possible products of Tool Steel DIN 1.2080 are as follows:

    DIN 1.2080 Rods, DIN 1.2080 Blooms, DIN 1.2080 Billets, DIN 1.2080 Bars, DIN 1.2080 Round Bars, DIN 1.2080 Flat Bars, DIN 1.2080 Round Corner Square Bars, DIN 1.2080 RCS Bars, DIN 1.2080 Straight Corner Square Bars, DIN 1.2080 SCS Bars, DIN 1.2080 Square Bars, DIN 1.2080 Rectangular Bars, DIN 1.2080 Hexagonal Bars, DIN 1.2080 Forged Bars, DIN 1.2080 Rolled Bars, DIN 1.2080 Black Bars, DIN 1.2080 Bright Bars, DIN 1.2080 Proof Machined Bars, DIN 1.2080 Hollow Bars, DIN 1.2080 Normalized Bars, DIN 1.2080 Annealed Bars, DIN 1.2080 Hardened (Quenched) Tempered Bars, DIN 1.2080 Blocks, DIN 1.2080 Slabs, DIN 1.2080 Circles, DIN 1.2080 Patta, DIN 1.2080 Forgings, DIN 1.2080 Machined Parts, DIN 1.2080 Shafts, DIN 1.2080 Pipes, DIN 1.2080 Seamless Pipes, DIN 1.2080 Heavy Wall Thickness Pipes, DIN 1.2080 Tube.

    Client can buy smaller quantities of DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars / 1.2080 Bars / 1.2080 / 1.2080 Bars / 2080 Round Bar / W.Nr. 1.2080 Bar / W.Nr. 1.2080 Round Bars / 1.2080 Tool Steel Bar / 1.2080 Hot Die Steel Bar / 1.2080 Tool Alloy Steel Bars / Tool Steel / Flat Die Steel / 2080 Flat Bar / 2080 Tool Steel Bar online from our associated manufacturing unit in India at premium cost.

    If any requirements for DIN 1.2080 Cold Working Tool Steel Round Bars / DIN 1.2080 Tool Steel Flat Bars / 1.2080 Bars / 1.2080 / 1.2080 Bars / 2080 Round Bar / W.Nr. 1.2080 Bar / W.Nr. 1.2080 Round Bars / 1.2080 Tool Steel Bar / 1.2080 Hot Die Steel Bar / 1.2080 Tool Alloy Steel Bars / Tool Steel / Flat Die Steel / 2080 Flat Bar / 2080 Tool Steel Bar kindlydo contact us.


    Additional Information:

  • Item Code: din-1-2080-tool-steel-round-bars-din-1-2080-flat-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    JIS SKD1 Cold Working Tool Steel Bars

    REQUEST CALLBACK

    JIS SKD1 Cold Working Tool Steel Bars
    Approx. Rs 285 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Size22mm to 350mm
    BrandJayant
    Material GradeJIS SKD1
    ApplicationConstruction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars / JIS SKD1 Bars / SKD1.

    JIS SKD1 tool steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648°C (1200°F) for one hour and cooled slowly. Annealing of JIS SKD1 tool steel needs to be done in a controlled atmosphere furnace. SKD1 tool steels should be heated thoroughly to 871°C (1600°F) and cooled slowly at a rate of not more than -6°C (20°F) per hour, until the furnace is black. Then the material should be removed and air cooled.

     

    SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars / JIS SKD1 Bars / SKD1 can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars / JIS SKD1 Bars / SKD1 in size range of 3mm upto 400mm in diameter.

     

    Chemical composition of SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars / JIS SKD1 Bars / SKD1:

    Element: Percentage

    C: 2.00-2.35

    Mn: 0.60

    Si: 0.60

    Cr: 11.00–13.50

    Ni: 0.30

    W: 1.00

    V: 1.00

    P: 0.03

    S: 0.03

    Cu: 0.25

     

    Other possible products of Tool Steel JIS SKD1 are as follows:

    JIS SKD1 Rods, JIS SKD1 Blooms, JIS SKD1 Billets, JIS SKD1 Bars, JIS SKD1 Round Bars, JIS SKD1 Flat Bars, JIS SKD1 Round Corner Square Bars, JIS SKD1 RCS Bars, JIS SKD1 Straight Corner Square Bars, JIS SKD1 SCS Bars, JIS SKD1 Square Bars, JIS SKD1 Rectangular Bars, JIS SKD1 Hexagonal Bars, JIS SKD1 Forged Bars, JIS SKD1 Rolled Bars, JIS SKD1 Black Bars, JIS SKD1 Bright Bars, JIS SKD1 Proof Machined Bars, JIS SKD1 Hollow Bars, JIS SKD1 Normalized Bars, JIS SKD1 Annealed Bars, JIS SKD1 Hardened (Quenched) Tempered Bars, JIS SKD1 Blocks, JIS SKD1 Slabs, JIS SKD1 Circles, JIS SKD1 Patta, JIS SKD1 Forgings, JIS SKD1 Machined Parts, JIS SKD1 Shafts, JIS SKD1 Pipes, JIS SKD1 Seamless Pipes, JIS SKD1 Heavy Wall Thickness Pipes, JIS SKD1 Tube.

     

    Client can buy smaller quantities of SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars JIS SKD1 Bars / SKD1 online from our associated manufacturing unit in India at premium cost.

    If any requirements for SKD1 Cold Working Tool Steel Round Bars / SKD1 Flat Bars / JIS SKD1 Bars / SKD1 kindly do contact us.


    Additional Information:

  • Item Code: skd1-cold-working-tool-steel-round-bars-skd1-flat-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    AISI D2 Cold Working Tool Steel Bars

    REQUEST CALLBACK

    AISI D2 Cold Working Tool Steel Bars
    Approx. Rs 211 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Size22mm to 350mm
    ApplicationAutomobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry
    BrandJayant
    Material GradeAISI D2

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar.

     

    Cold-work tool steels include the high-carbon, high-chromium steels or group D steels. These steels are designated as group D steels and consist of D2, D3, D4, D5, and D7 steels. These steels contain 1.5 to 2.35% of carbon and 12% of chromium. Except type D3 steel, all the other group D steels include 1% Mo and are air hardened. Type D3 steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 steel tends to be brittle during hardening. Type D2 steel is the most commonly used steel among the group D steels. 

     

    D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar in size range of 3mm upto 450mm in diameter.

     

    Chemical composition of D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar:

    Element: Percentage

    C: 1.40 – 1.60

    Mn: 0.60

    Si: 0.60

    Co: 1.00

    Cr: 11.00 – 13.00

    Mo: 0.70 – 1.20

    V: 1.10

    P: 0.03

    Ni: 0.30

    Cu: 0.25

    S: 0.03

     

    Other possible products of Tool Steel AISI D2 are as follows:

    AISI D2 Rods, AISI D2 Blooms, AISI D2 Billets, AISI D2 Bars, AISI D2 Round Bars, AISI D2 Flat Bars, AISI D2 Round Corner Square Bars, AISI D2 RCS Bars, AISI D2 Straight Corner Square Bars, AISI D2 SCS Bars, AISI D2 Square Bars, AISI D2 Rectangular Bars, AISI D2 Hexagonal Bars, AISI D2 Forged Bars, AISI D2 Rolled Bars, AISI D2 Black Bars, AISI D2 Bright Bars, AISI D2 Proof Machined Bars, AISI D2 Hollow Bars, AISI D2 Normalized Bars, AISI D2 Annealed Bars, AISI D2 Hardened (Quenched) Tempered Bars, AISI D2 Blocks, AISI D2 Slabs, AISI D2 Circles, AISI D2 Patta, AISI D2 Forgings, AISI D2 Machined Parts, AISI D2 Shafts, AISI D2 Pipes, AISI D2 Seamless Pipes, AISI D2 Heavy Wall Thickness Pipes, AISI D2 Tube.

     

    Client can buy smaller quantities of D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar online from our associated manufacturing unit in India at premium cost.

     

    If any requirements for D2 Cold Working Tool Steel Round Bar/ D2 Tool Steel Flat Bar kindly do contact us.


    Additional Information:

  • Item Code: d2-cold-working-tool-steel-round-bar-d2-tool-steel-flat-bar
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar

    REQUEST CALLBACK

    W.Nr. X210Cr12 Cold Working Tool Steel DIN X210Cr12 Bar
    Approx. Rs 350 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Material GradeW.Nr. X210Cr12, DIN X210Cr12, Alloy Steel X210Cr12, Tool Steel X210Cr12, Die Steel X210Cr12
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    BrandJayant
    Size22mm to 350mm
    ApplicationAutomobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry, Tool Dies

    Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar / X210Cr12  Bar / X210Cr12  Round Bar / DIN X210Cr12 Round Bars / W.Nr. X210Cr12 Round Bar / Tool Steel / Die Steel Bar / Flat Die Steel / Alloy Steel Bar.

    W.Nr. X210Cr12 tool steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. X210Cr12 tool steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954°C (1750°F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it.

    X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar / X210Cr12  Bar / X210Cr12  Round Bar / DIN X210Cr12 Round Bars / W.Nr. X210Cr12 Round Bar / Tool Steel / Die Steel Bar / Flat Die Steel / Alloy Steel Bar in size range of 3mm upto 400mm in diameter.

     

    Chemical composition of X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar:

    Element: Percentage

    Carbon, C: 2.00-2.35

    Manganese, Mn: 0.60

    Silicon, Si: 0.60

    Chrome, Cr: 11.00–13.50

    Nickel, Ni: 0.30

    Tungsten, W: 1.00

    Vanadium, V: 1.00

    Phosphorus, P: 0.03

    Silicon, S: 0.03

    Copper, Cu: 0.25

     

    Other possible products of Tool Steel W.Nr. X210Cr12 are as follows:

    W.Nr. X210Cr12 Rods, W.Nr. X210Cr12 Blooms, W.Nr. X210Cr12 Billets, W.Nr. X210Cr12 Bars, W.Nr. X210Cr12 Round Bars, W.Nr. X210Cr12 Flat Bars, W.Nr. X210Cr12 Round Corner Square Bars, W.Nr. X210Cr12 RCS Bars, W.Nr. X210Cr12 Straight Corner Square Bars, W.Nr. X210Cr12 SCS Bars, W.Nr. X210Cr12 Square Bars, W.Nr. X210Cr12 Rectangular Bars, W.Nr. X210Cr12 Hexagonal Bars, W.Nr. X210Cr12 Forged Bars, W.Nr. X210Cr12 Rolled Bars, W.Nr. X210Cr12 Black Bars, W.Nr. X210Cr12 Bright Bars, W.Nr. X210Cr12 Proof Machined Bars, W.Nr. X210Cr12 Hollow Bars, W.Nr. X210Cr12 Normalized Bars, W.Nr. X210Cr12 Annealed Bars, W.Nr. X210Cr12 Hardened (Quenched) Tempered Bars, W.Nr. X210Cr12 Blocks, W.Nr. X210Cr12 Slabs, W.Nr. X210Cr12 Circles, W.Nr. X210Cr12 Patta, W.Nr. X210Cr12 Forgings, W.Nr. X210Cr12 Machined Parts, W.Nr. X210Cr12 Shafts, W.Nr. X210Cr12 Pipes, W.Nr. X210Cr12 Seamless Pipes, W.Nr. X210Cr12 Heavy Wall Thickness Pipes, W.Nr. X210Cr12 Tube.

     

    Client can buy smaller quantities of X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar / X210Cr12  Bar / X210Cr12  Round Bar / DIN X210Cr12 Round Bars / W.Nr. X210Cr12 Round Bar / Tool Steel / Die Steel Bar / Flat Die Steel / Alloy Steel Bar online from our associated manufacturing unit in India at premium cost.

    If any requirements for X210Cr12 Cold Working Tool Steel Round Bar / X210Cr12 Flat Bar / X210Cr12  Bar / X210Cr12  Round Bar / DIN X210Cr12 Round Bars / W.Nr. X210Cr12 Round Bar / Tool Steel / Die Steel Bar / Flat Die Steel / Alloy Steel Bar kindlydo contact us.


    Additional Information:

  • Item Code: x210cr12-cold-working-tool-steel-round-barx210cr12-flat-bar
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods

    REQUEST CALLBACK

    JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods
    Approx. Rs 225 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    Size22mm to 350mm
    Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, Upto 350mm
    BrandJayant Impex(JIPL), Imported
    Material GradeJIS SKD11, Tool Steel SKD11, Alloy Steel SKD11, Die Steel SKD11,
    ApplicationConstruction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry
    Single Piece Length3 meter, 6 meter

    Tradewell Ferromet can offer JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods / SKD11 Flat Bars / SKD11 Bar /SKD11 / SKD11 Tool Steel Bar / SKD11 Round Bar / SKD11 Hot Die steel bar / skd11 alloy tool steel bar / Alloy Steel / Tool Steel / Hot Die Steel Bar / Cold Wokring Tool Steel.

    JIS SKD11 steels should be preheated very slowly to 815ºC (1500ºF) and then temperature can be increased to 1010ºC (1850ºF). They are then held at 1010ºC (1850ºF) for 20 to 45 minutes and air cooled (air quenched).

    Forging of JIS SKD11 steels can be done from 1065ºC (1950ºF) down to 954ºC (1750ºF). Do not forge below 926ºC (1700ºF). Annealing of JIS SKD11 steels should be done at 871 to 898ºC (1600 to 1650ºF) followed by slow furnace cooling at 4.4ºC (40ºF) per hour or less. JIS SKD11 tool steels are used for long run tooling applications, where wear resistance is important, such as blanking or forming dies and thread rolling dies.

    SKD11 Cold Working Tool Steel Round Bars / SKD11 Flat Bars / SKD11 Bar /SKD11 / SKD11 Tool Steel Bar / SKD11 Round Bar / SKD11 Hot Die steel bar / skd11 alloy tool steel bar / Alloy Steel / Tool Steel / Hot Die Steel Bar / Cold Wokring Tool Steel can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

    Size Specifications: Can offer SKD11 Cold Working Tool Steel Round Bars / SKD11 Flat Bars in size range of 3mm upto 400mm in diameter.

     

    Chemical composition of SKD11 Cold Working Tool Steel Round Bars / SKD11 Flat Bars:

    Element: Percentage

    C: 1.40 – 1.60

    Mn: 0.60

    Si: 0.60

    Co: 1.00

    Cr: 11.00 – 13.00

    Mo: 0.70 – 1.20

    V: 1.10

    P: 0.03

    Ni: 0.30

    Cu: 0.25

    S: 0.03

    Other possible products of Tool Steel JIS SKD11 are as follows:

    JIS SKD11 Rods, JIS SKD11 Blooms, JIS SKD11 Billets, JIS SKD11 Bars, JIS SKD11 Round Bars, JIS SKD11 Flat Bars, JIS SKD11 Round Corner Square Bars, JIS SKD11 RCS Bars, JIS SKD11 Straight Corner Square Bars, JIS SKD11 SCS Bars, JIS SKD11 Square Bars, JIS SKD11 Rectangular Bars, JIS SKD11 Hexagonal Bars, JIS SKD11 Forged Bars, JIS SKD11 Rolled Bars, JIS SKD11 Black Bars, JIS SKD11 Bright Bars, JIS SKD11 Proof Machined Bars, JIS SKD11 Hollow Bars, JIS SKD11 Normalized Bars, JIS SKD11 Annealed Bars, JIS SKD11 Hardened (Quenched) Tempered Bars, JIS SKD11 Blocks, JIS SKD11 Slabs, JIS SKD11 Circles, JIS SKD11 Patta, JIS SKD11 Forgings, JIS SKD11 Machined Parts, JIS SKD11 Shafts, JIS SKD11 Pipes, JIS SKD11 Seamless Pipes, JIS SKD11 Heavy Wall Thickness Pipes, JIS SKD11 Tube.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India Client can buy smaller quantities of JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods / SKD11 Flat Bars / SKD11 Bar /SKD11 / SKD11 Tool Steel Bar / SKD11 Round Bar / SKD11 Hot Die steel bar / skd11 alloy tool steel bar / Alloy Steel / Tool Steel / Hot Die Steel Bar / Cold Wokring Tool Steel online from our associated manufacturing unit in India at premium cost.

    If any requirements for JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods / SKD11 Flat Bars / SKD11 Bar /SKD11 / SKD11 Tool Steel Bar / SKD11 Round Bar / SKD11 Hot Die steel bar / skd11 alloy tool steel bar / Alloy Steel / Tool Steel / Hot Die Steel Bar / Cold Wokring Tool Steel kindly do contact us.


    Additional Information:

  • Item Code: skd11-cold-working-tool-steel-round-bars-skd11-flat-bars
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

    AISI D3 Cold Working Tool Steel D3 Flat HCHCR D-3 Bars

    REQUEST CALLBACK

    AISI D3 Cold Working Tool Steel D3 Flat HCHCR D-3 Bars
    Approx. Rs 223 / Kilogram
    Get Best Quote
    Product Details:
    Minimum Order Quantity1000 Kilogram
    Material GradeAISI D3, SAE D3, Tool Steel D3, HCHCR D3, Die Steel D-3, High Carbon High Chromium D3 Tool Steel
    Payment Terms100% Advance Against Proforma Invoice. Sorry no credits
    Third Party Inspection (TPI)Allowed. Charges to be borne by buyer.
    Test CertificateNABL Government approved laboratory reports can be provided.
    ApplicationAutomobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry
    BrandJayant

    Tradewell Ferromet can offer AISI D3 Cold Working Tool Steel Bar, D3 Bar, HCHCR D-3 Bars, HCHCR Tool Steel, D3 Tool Steel, D3 Rod, D3 Die Steel Rods, D3 Alloy Steel Bar, High Carbon High Chromium (HCHCR) Steel, Tool Steel, HCHCR Steels.

    Cold-work tool steels which include D2, D3, D4, D5, and D7 steels are high-carbon, high-chromium steels. Apart from D3 steel all group D steels have 1% Mo and are air hardened. Type D3 steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 steel tend to be brittle during hardening. Type D2 steel is the most commonly used steel among the group D steels. The D3 steels contain 1.5 to 2.35% of carbon and 12% of chromium.

     

    D3 Cold Working Tool Steel Round Bar/ D3 Tool Steel Flat Bar / AISI D3 Bars / D3 Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

     

    Size Specifications: Can offer D3 Cold Working Tool Steel Round Bar/ D3 Tool Steel Flat Bar in size range of 3mm upto 400mm in diameter.

     

    Chemical composition of D3 Cold Working Tool Steel Round Bar/ D3 Tool Steel Flat Bar:

    Element: Percentage

    C: 2.00-2.35

    Mn: 0.60

    Si: 0.60

    Cr: 11.00–13.50

    Ni: 0.30

    W: 1.00

    V: 1.00

    P: 0.03

    S: 0.03

    Cu: 0.25

     

    Other possible products of High Carbon High Chromium (HCHCR) Tool Steel AISI D3 are as follows:

    HCHCR D3 Rods, HCHCR D3 Blooms, HCHCR D3 Billets, HCHCR D3 Bars, HCHCR D3 Round Bars, HCHCR D3 Flat Bars, HCHCR D3 Round Corner Square Bars, HCHCR D3 RCS Bars, HCHCR D3 Straight Corner Square Bars, HCHCR D3 SCS Bars, HCHCR D3 Square Bars, HCHCR D3 Rectangular Bars, HCHCR D3 Hexagonal Bars, HCHCR D3 Forged Bars, HCHCR D3 Rolled Bars, HCHCR D3 Black Bars, HCHCR D3 Bright Bars, HCHCR D3 Proof Machined Bars, HCHCR D3 Hollow Bars, HCHCR D3 Normalized Bars, HCHCR D3 Annealed Bars, HCHCR D3 Hardened (Quenched) Tempered Bars, HCHCR D3 Blocks, HCHCR D3 Slabs, HCHCR D3 Circles, HCHCR D3 Patta, HCHCR D3 Forgings, HCHCR D3 Machined Parts, HCHCR D3 Shafts, HCHCR D3 Pipes, HCHCR D3 Seamless Pipes, HCHCR D3 Heavy Wall Thickness Pipes, HCHCR D3 Tube.

    From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India Client can buy smaller quantities of AISI D3 Cold Working Tool Steel Bar, D3 Bar, HCHCR D-3 Bars, HCHCR Tool Steel, D3 Tool Steel, D3 Rod, D3 Die Steel Rods, D3 Alloy Steel BarHigh Carbon High Chromium (HCHCR) Steel, Tool Steel, HCHCR Steels online from our associated manufacturing unit in India at premium cost.

    If any requirements for AISI D3 Cold Working Tool Steel Bar, D3 Bar, HCHCR D-3 Bars, HCHCR Tool Steel, D3 Tool Steel, D3 Rod, D3 Die Steel Rods, D3 Alloy Steel BarHigh Carbon High Chromium (HCHCR) Steel, Tool Steel, HCHCR Steels kindlydo contact us.


    Additional Information:

  • Item Code: d3-cold-working-tool-steel-round-bar-d3-tool-steel-flat-bar
  • Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
  • Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
  • Packaging Details: Wooden Box, Pallets or as per client's request
  • Yes! I am interested

     
    X


    Call Us: +91-8048601955
    Tradewell Ferromet Private Limited
    Girish Mehta (Marketing Director)
    Shop No. 6, Ground Floor, Mahimwala Building Opposite Sardar High School, Grant Road Station,
    Mumbai - 400004, Maharashtra, India
    Contact via E-mail
    Contact via SMS


    Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

    © Tradewell Ferromet Private Limited. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Tradewell Ferromet Private Limited