Product Details:
Minimum Order Quantity | 1000 Kilogram |
Application | Construction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
Brand | Jayant, Imported |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Size | 22mm to 420mm |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Mould Steel Round Bars / Steel Flat Bars / Mold Steel Bars / Mould Steel Bar.
Mould Steel is a pre-hardened plastic mould steel with very good polishability.
Mould Steel Round Bars / Mold Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer Mould Steel Round Bars / Plastic Mold Steel Flat Bars in size range of 22mm upto 250mm in diameter.
Chemical composition of Mould Steel Round Bars / Plastic Mould Steel Flat Bars / Tool Steel Bars / Alloy Steel Bar:
Element: Percentage
C: 0.28-0.40
Mn: 0.60-1.00
Si: 0.20-0.80
Cr: 1.40-2.00
Mo: 0.30-0.55
Cu: 0.25
P: 0.03
S: 0.03
Client can buy smaller quantities of Mould Steel Round Bars / Steel Flat Bars / Tool Steel Bars online from our associated manufacturing unit in India at premium cost.
If any requirements for Mould Steel Round Bars / Steel Flat Bars / Tool Steel Flat Bars / Alloy Steelkindlydo contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Application | Construction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
Brand | Jayant |
Material Grade | DIN 1.2738 |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Size | 22mm to 350mm |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars / 1.2738 Bars / 1.2738.
DIN 1.2738 is upgrade version of plastic mould steel 0f 1.2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB. The additional nickel content of 1 % increases through hardening. It is micro-alloyed. It has good machinability, suitable for texturing, outstanding polishability, adequate corrosion resistance. vacuum-degassed steel with the following excellent features.
1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer 1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars in size range of 22mm upto 350mm in diameter.
Chemical composition of 1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars / 1.2738 Bars / 1.2738:
Element: Percentage
Carbon, C: 0.35-0.45
Manganese, Mn: 1.30-1.60
Silicon, Si: 0.20-0.40
Chrome, Cr: 1.80-2.10
Molybdenum, Mo: 0.15-0.25
Nickel, Ni: 0.90-1.20
Phosphorus, P: 0.03
Sulfur, S: 0.03
Other possible products of Plastic Mould Tool Steel DIN 1.2738 are as follows:
DIN 1.2738 Rods, DIN 1.2738 Blooms, DIN 1.2738 Billets, DIN 1.2738 Bars, DIN 1.2738 Round Bars, DIN 1.2738 Flat Bars, DIN 1.2738 Round Corner Square Bars, DIN 1.2738 RCS Bars, DIN 1.2738 Straight Corner Square Bars, DIN 1.2738 SCS Bars, DIN 1.2738 Square Bars, DIN 1.2738 Rectangular Bars, DIN 1.2738 Hexagonal Bars, DIN 1.2738 Forged Bars, DIN 1.2738 Rolled Bars, DIN 1.2738 Black Bars, DIN 1.2738 Bright Bars, DIN 1.2738 Proof Machined Bars, DIN 1.2738 Hollow Bars, DIN 1.2738 Normalized Bars, DIN 1.2738 Annealed Bars, DIN 1.2738 Hardened (Quenched) Tempered Bars, DIN 1.2738 Blocks, DIN 1.2738 Slabs, DIN 1.2738 Circles, DIN 1.2738 Patta, DIN 1.2738 Forgings, DIN 1.2738 Machined Parts, DIN 1.2738 Shafts, DIN 1.2738 Pipes, DIN 1.2738 Seamless Pipes, DIN 1.2738 Heavy Wall Thickness Pipes, DIN 1.2738 Tube.
Client can buy smaller quantities of 1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars / 1.2738 Bars / 1.2738 online from our associated manufacturing unit in India at premium cost.
If any requirements for 1.2738 Mould Steel Round Bars / 1.2738 Mould Steel Flat Bars / 1.2738 Bars / 1.2738 kindly do contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Size | 22mm to 450mm |
Brand | Jayant |
Material Grade | SAE / AISI P20+Ni |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Application | Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars / P20+Ni Bars.
P20+Ni is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. P20+Ni is upgraded version of plastic mould steel of 1.2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB with having uniform hardness. The additional nickel content of 1% increases through hardening. It has good machinability, suitable for Texturing, fine polishability, adequate corrosion resistance, vacuum-degassed steel.
P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars in size range of 25mm upto 400mm in diameter.
Chemical composition of P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars / P20+Ni Bars:
C | Si | Mn | Ni | P | S | Cr | Mo |
0.35 - 0.45 | 0.2 - 0.4 | 1.3 - 1.6 | 0.9 - 1.2 | max 0.03 | max 0.03 | 1.8 - 2.1 | 0.15 - 0.25 |
Other possible products of Plastic Mould Tool Steel AISI P20+Ni are as follows:
AISI P20+Ni Rods, AISI P20+Ni Blooms, AISI P20+Ni Billets, AISI P20+Ni Bars, AISI P20+Ni Round Bars, AISI P20+Ni Flat Bars, AISI P20+Ni Round Corner Square Bars, AISI P20+Ni RCS Bars, AISI P20+Ni Straight Corner Square Bars, AISI P20+Ni SCS Bars, AISI P20+Ni Square Bars, AISI P20+Ni Rectangular Bars, AISI P20+Ni Hexagonal Bars, AISI P20+Ni Forged Bars, AISI P20+Ni Rolled Bars, AISI P20+Ni Black Bars, AISI P20+Ni Bright Bars, AISI P20+Ni Proof Machined Bars, AISI P20+Ni Hollow Bars, AISI P20+Ni Normalized Bars, AISI P20+Ni Annealed Bars, AISI P20+Ni Hardened (Quenched) Tempered Bars, AISI P20+Ni Blocks, AISI P20+Ni Slabs, AISI P20+Ni Circles, AISI P20+Ni Patta, AISI P20+Ni Forgings, AISI P20+Ni Machined Parts, AISI P20+Ni Shafts, AISI P20+Ni Pipes, AISI P20+Ni Seamless Pipes, AISI P20+Ni Heavy Wall Thickness Pipes, AISI P20+Ni Tube.
Client can buy smaller quantities of P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars / P20+Ni Bars online from our associated manufacturing unit in India at premium cost.
If any requirements for P20+Ni Mould Steel Round Bars / P20+Ni Mould Steel Flat Bars / P20+Ni Bars kindly do contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kg |
Packaging Type | Loose |
Scrap Form | Plate Offcuts, Ring Offcut, Dies, Molding Dies, Bars Offcuts |
Application | Oil & Gas Industry |
Material Grade | P20, P20NI, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Brand | Imported |
Size | 10mm to 240mm |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Mould Steel Round Bars Scrap / P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Flat Bars Scrap/ P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Bars Scrap / Plastic Mould Steel / Tool Steel / Mold Steel .
P20, P20NI, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 are all mold steel grades used for molding dies & tools.
P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Mould Steel Round Bars Scrap/ P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Flat Bars Scrap / Plastic Mould Steel / Tool Steel / Mold Steel can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Mould Steel Round Bars Scrap / P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Flat Bars Scrap in size range of 22mm upto 200mm in diameter
Client can buy smaller quantities of P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Mould Steel Round Bars Scrap / P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Flat Bars Scrap/ P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Bars Scrap / Plastic Mould Steel / Tool Steel / Mold Steel online from our associated manufacturing unit in India at premium cost.
If any requirements for P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Mould Steel Round Bars Scrap / P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Flat Bars Scrap/ P20, P20Ni, 1.2316, 1.2083, 1.2085, 1.2767, 1.2367 Bars Scrap / Plastic Mould Steel / Tool Steel / Mold Steel kindly do contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Application | Construction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
Brand | Jayant, Imported |
Material Grade | DIN 1.2311 |
Size | 22mm to 450mm |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 1.2311 Plastic Mould Steel Round Bars / 1.2311 Plastic Mould Steel Flat Bars / 1.2311 Bars / 1.2311.
DIN 1.2311 Plastic Mould Steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW.
1.2311 Plastic Mould Steel Round Bars / 1.2311 Plastic Mould Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer 1.2311 Plastic Mould Steel Round Bars / 1.2311 Plastic Mould Steel Flat Bars in size range of 25mm upto 400mm in diameter.
Chemical composition of 1.2311 Plastic Mould Steel Round Bars / 1.2311 Plastic Mould Steel Flat Bars / 1.2311 Bars / 1.2311:
Element: Percentage
C: 0.28-0.40
Mn: 0.60-1.00
Si: 0.20-0.80
Cr: 1.40-2.00
Mo: 0.30-0.55
Cu: 0.25
P: 0.03
S: 0.03
Other possible products of Plastic Mould Tool Steel DIN 1.2311 are as follows:
DIN 1.2311 Rods, DIN 1.2311 Blooms, DIN 1.2311 Billets, DIN 1.2311 Bars, DIN 1.2311 Round Bars, DIN 1.2311 Flat Bars, DIN 1.2311 Round Corner Square Bars, DIN 1.2311 RCS Bars, DIN 1.2311 Straight Corner Square Bars, DIN 1.2311 SCS Bars, DIN 1.2311 Square Bars, DIN 1.2311 Rectangular Bars, DIN 1.2311 Hexagonal Bars, DIN 1.2311 Forged Bars, DIN 1.2311 Rolled Bars, DIN 1.2311 Black Bars, DIN 1.2311 Bright Bars, DIN 1.2311 Proof Machined Bars, DIN 1.2311 Hollow Bars, DIN 1.2311 Normalized Bars, DIN 1.2311 Annealed Bars, DIN 1.2311 Hardened (Quenched) Tempered Bars, DIN 1.2311 Blocks, DIN 1.2311 Slabs, DIN 1.2311 Circles, DIN 1.2311 Patta, DIN 1.2311 Forgings, DIN 1.2311 Machined Parts, DIN 1.2311 Shafts, DIN 1.2311 Pipes, DIN 1.2311 Seamless Pipes, DIN 1.2311 Heavy Wall Thickness Pipes, DIN 1.2311 Tube.
Client can buy smaller quantities of 1.2311 Plastic Mould Steel Round Bars / Plastic 1.2311 Mould Steel Flat Bars / 1.2311 Bars / 1.2311 online from our associated manufacturing unit in India at premium cost.
If any requirements for 1.2311 Plastic Mould Steel Round Bars / Plastic 1.2311 Mould Steel Flat Bars / 1.2311 Bars / 1.2311kindlydo contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Single Piece Length | 6 meter, 3 meter |
Application | Manufacturing, School/College Workshop, Construction |
Thickness/Diameter | 2-3 inch, >4 inch, 1-2 inch, 3-4 inch, 0-1 inch |
Brand | Tradewell Ferromet Pvt. Ltd |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Application | Oil & Gas Industry, Automobile Industry, Construction, Pharmaceutical / Chemical Industry |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch |
Tradewell Ferromet can offer Plastic Mold or Mould Steel, Plastic Mould Steel Bar, Plastic Mold Steel Round Bars / Mold Steel / Tool Steel / Plastic Mould Steel.
Pre Hardened Plastic mould steel hardness is distributed evenly in large cross sections that have excellent weldability with least hardness elevation, good mirror polishability and less streak texture making finishing easier. Size Section availability upto 255mm thickness. Supply hardness is 240-280 BHN.
Mould Steel Round Bars / Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer Mould Steel Round Bars / Plastic Mold Steel Flat Bars in size range of 22mm upto 250mm in diameter.
Chemical composition of Mould Steel Round Bars / Bohler Flat Bars / Mold Steel Bars:
Element: Percentage
Carbon, C: 0.28-0.40
Manganese, Mn: 0.60-1.00
Silicon, Si: 0.20-0.80
Chrome, Cr: 1.40-2.00
Molybdenum, Mo: 0.30-0.55
Copper, Cu: 0.25
Phosphorus, P: 0.03
Sulfur, S: 0.03
From Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India client can buy smaller quantities of Plastic Mould Steel Bar, Plastic Mold Steel Round Bars / Mold Steel Bars/ Mold Steel / Tool Steel / Plastic Mould Steel online from our associated manufacturing unit in India at premium cost.
If any requirements for Plastic Mould Steel Bar, Plastic Mold Steel Round Bars / Mold Steel / Tool Steel / Plastic Mould Steel kindly do contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Application | Construction, Automobile Industry,Pharmaceutical / Chemical Industry,Oil & Gas Industry |
Material Grade | DIN 1.2316 |
Brand | Jayant |
Size | 22mm to 320mm |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars / 1.2316 Bars / 1.2316.
DIN 1.2316 is a chrome-molybdenum mould steel with improved corrosion resistance properties, 1.2316 possesses good polishability, toughness, heat resistance and wear-resistant properties. It is often used for tools for processing chemically aggressive plastic materials (e.g. PVC). This grade is not suitable for nitriding and chrome plating because of the high chrome content.
1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications: Can offer 1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars in size range of 25mm upto 400mm in diameter.
Chemical composition of 1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars / 1.2316 Bars / 1.2316:
C | Si | Mn | Ni | P | S | Cr | Mo |
0.33 - 0.45 | max 1 | max 1.5 | max 1 | max 0.03 | max 0.03 | 15.5 - 17.5 | 0.8 - 1.3 |
Other possible products of Plastic Mould Tool Steel DIN 1.2316 are as follows:
DIN 1.2316 Rods, DIN 1.2316 Blooms, DIN 1.2316 Billets, DIN 1.2316 Bars, DIN 1.2316 Round Bars, DIN 1.2316 Flat Bars, DIN 1.2316 Round Corner Square Bars, DIN 1.2316 RCS Bars, DIN 1.2316 Straight Corner Square Bars, DIN 1.2316 SCS Bars, DIN 1.2316 Square Bars, DIN 1.2316 Rectangular Bars, DIN 1.2316 Hexagonal Bars, DIN 1.2316 Forged Bars, DIN 1.2316 Rolled Bars, DIN 1.2316 Black Bars, DIN 1.2316 Bright Bars, DIN 1.2316 Proof Machined Bars, DIN 1.2316 Hollow Bars, DIN 1.2316 Normalized Bars, DIN 1.2316 Annealed Bars, DIN 1.2316 Hardened (Quenched) Tempered Bars, DIN 1.2316 Blocks, DIN 1.2316 Slabs, DIN 1.2316 Circles, DIN 1.2316 Patta, DIN 1.2316 Forgings, DIN 1.2316 Machined Parts, DIN 1.2316 Shafts, DIN 1.2316 Pipes, DIN 1.2316 Seamless Pipes, DIN 1.2316 Heavy Wall Thickness Pipes, DIN 1.2316 Tube.
Client can buy smaller quantities of DIN 1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars / 1.2316 Bars / 1.2316 online from our associated manufacturing unit in India at premium cost.
If any requirements for 1.2316 Mould Steel Round Bars / 1.2316 Mould Steel Flat Bars / 1.2316 Bars / 1.2316 kindly do contact us.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Size | 20mm upto 130mm |
Brand | Jayant, Imported |
Material Grade | AISI P20, SAE P20, P20 Steel, P20 Alloy Steel, P20 Tool Steel, P20 Mould Steel, P20 Plastic Mold |
Payment Terms | 100% Advance Against Proforma Invoice. Sorry no credits |
Third Party Inspection (TPI) | Allowed. Charges to be borne by buyer. |
Test Certificate | NABL Government approved laboratory reports can be provided. |
Application | Pharmaceutical / Chemical Industry, Tools, Construction, Engineering Project, Automobile Industry, Die, Engineering project, School/College Project, Oil & Gas Industry, School / College Project |
Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Block / Tool steel / mold steel.
Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Block is a pre-hardened plastic mould steel with very good polishability. Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Block is a premium-quality vacuum-degassed Cr-Ni-Mo-alloyed steel which is supplied in the hardened and tempered condition.
Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Block is manufactured to consistently high quality standards with a very low sulfur content, giving a steel with the following characteristics:
Applications:
Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Blocks can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.
Size Specifications for Plastic Mould Steel / Mold Steel / Tool Steel: Can offer Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Blocks in size range of 22mm upto 200mm in diameter.
Chemical composition of Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Blocks / Tool steel / mold steel:
C | Si | Mn | Ni | P | S | Cr | Mo |
0.35 - 0.45 | 0.2 - 0.4 | 1.3 - 1.6 | 0.9 - 1.2 | max 0.03 | max 0.03 | 1.8 - 2.1 |
|
Client can buy smaller quantities of Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Blocks / Plastic Mould Steel / Mold Steel / Tool Steel online from our associated manufacturing unit in India at premium cost.
If any requirements for Plastic Mould Steel Bar/ P20 Flat Bars/ P20 Tool Steel Blocks / Plastic Mould Steel / Mold Steel / Tool Steelkindlydo contact us.
Additional Information: