New Items

Product Details:

Jayant Impex trade in all types of raw material, valves and fasteners. If required kindly contact us.

Additional Information:

• Packaging Details: As per client's request

Product Details:

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Cr-Mn-N Steel Steel route NAS NM15M Round Bars, NAS NM15M Round Forged Bars, NAS NM15M Forged Rods, NAS NM15M Black Round Bars, Bright Round Bars, NAS NM15M Rolled Round Bars, NAS NM15M Peeled Round Bars, NAS NM15M Proof Machined Round Bars, NAS NM15M Threaded Round Bars, NAS NM15M Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

 

NAS NM15M Nonmagnetic austenitic stainless steels chemical composition/chemistry:

Carbon: 0.04-0.09

Phosphorus: 0.045 max

Silicon: 0.90 max

Nickel: 4.00-4.60

Copper: -

Iron: Balance

Manganese: 14.00 to 15.00

Sulfur: 0.01 max

Chromium: 16.50 to 17.50

Molybdenum: -

Nitrogen: 0.30 to 0.35

Cobalt: <0.10

 

Size Range for NAS NM15M Round Bars: 6mm upto 200mm

Length for NAS NM15M Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of NAS NM15M Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for NAS NM15M Round Bars: Bright & Black

 NAS NM15M Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Cr-Mn-N Steel Steel route NAS NM15M Round Bars, NAS NM15M Round Forged Bars, NAS NM15M Forged Rods, NAS NM15M Black Round Bars, Bright Round Bars, NAS NM15M Rolled Round Bars, NAS NM15M Peeled Round Bars, NAS NM15M Proof Machined Round Bars, NAS NM15M Threaded Round Bars, NAS NM15M Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Cr-Mn-N Steel SteelNAS NM15M Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Cr-Mn-N Steel SteelNAS NM15M Round Bars, NAS NM15M Round Forged Bars, NAS NM15M Forged Rods, NAS NM15M Black Round Bars, Bright Round Bars, NAS NM15M Rolled Round Bars, NAS NM15M Peeled Round Bars, NAS NM15M Proof Machined Round Bars, NAS NM15M Threaded Round Bars, NAS NM15M Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Product Details:

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Cr-Mn-N Steel Steel route UNS S29108 Round Bars, UNS S29108 Round Forged Bars, UNS S29108 Forged Rods, UNS S29108 Black Round Bars, Bright Round Bars, UNS S29108 Rolled Round Bars, UNS S29108 Peeled Round Bars, UNS S29108 Proof Machined Round Bars, UNS S29108 Threaded Round Bars, UNS S29108 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced from Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

 

UNS S29108 Nonmagnetic austenitic stainless steels chemical composition/chemistry:

Carbon: 0.08 max

Phosphorus: 0.03 max

Silicon: 0.75 max

Nickel: 0.05 max

Copper: 0.25 max

Iron: Balance

Manganese: 21.00 to 24.00

Sulfur: 0.01 max

Chromium: 19.00 to 23.00

Molybdenum: 0.50 to 1.50

Nitrogen: 0.85 to 1.10

Cobalt: <0.10

 

Size Range for UNS S29108 Round Bars: 6mm upto 200mm

Length for UNS S29108 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of UNS S29108 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for UNS S29108 Round Bars: Bright & Black

 UNS S29108 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Cr-Mn-N Steel Steel route UNS S29108 Round Bars, UNS S29108 Round Forged Bars, UNS S29108 Forged Rods, UNS S29108 Black Round Bars, Bright Round Bars, UNS S29108 Rolled Round Bars, UNS S29108 Peeled Round Bars, UNS S29108 Proof Machined Round Bars, UNS S29108 Threaded Round Bars, UNS S29108 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Cr-Mn-N Steel SteelUNS S29108 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Cr-Mn-N Steel SteelUNS S29108 Round Bars, UNS S29108 Round Forged Bars, UNS S29108 Forged Rods, UNS S29108 Black Round Bars, Bright Round Bars, UNS S29108 Rolled Round Bars, UNS S29108 Peeled Round Bars, UNS S29108 Proof Machined Round Bars, UNS S29108 Threaded Round Bars, UNS S29108 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Product Details:

1.2360/X48CrMoV8-1-1 is a high-carbon, high-chromium, and high-vanadium steel that belongs to the group of air-hardening tool steels. It is primarily used for applications requiring excellent wear resistance, high hardness, and good toughness in cold working operations, such as cutting, stamping, forming, and blanking of materials at room temperature or below.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: As per client's request.

Product Details:

With our rich industry experience and knowledge, we are engaged in offering a high-quality assortment of Industrial Solenoid Valves. Our offered valves are mainly used in petrochemical, chemical, and other similar industries for controlling the flow of liquid. Also, provided valves are manufactured using high-quality grade raw materials with the aid of advanced technology under the supervision of our diligent professionals in accordance with predefined standards. Further, clients can avail themselves of these Industrial Solenoid Valves from us at affordable prices.

Available Valves: 2 Way, 3 Way, 4 Way, 5 Way Solenoid Valve

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: As per client's request

Product Details:

Snap rings are a type of fastener used in mechanical and engineering applications to secure components on a shaft or within a bore. They are designed to fit into a groove or recess in a shaft or housing, providing a retaining or locking mechanism to prevent components from moving axially.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A Helicoil tool kit used for repairing damaged or stripped threads in various materials, typically metals. It is a type of thread repair kit that includes everything needed to restore threads to their original condition or to create new threads in a hole.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A JCB control valve refers to a hydraulic control valve used in JCB, construction and agricultural equipment.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Nitinol wire is a unique and versatile material known for its remarkable shape memory and superelastic properties.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Abrasive metering valves are specialized types of valves used in abrasive blasting or abrasive jet machining processes. These valves are designed to control the flow rate of abrasive particles mixed with a carrier gas (such as air) in abrasive blasting equipment.

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: As per client's request

Product Details:

Carbon steel gate valves are a type of industrial valve designed to control the flow of fluids (liquid or gas) through a pipeline using a sliding gate or wedge mechanism. These valves are commonly used in various industries, including oil and gas, petrochemicals, power generation, water treatment, and more.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A high-pressure globe valve is designed to withstand and control fluids under high-pressure conditions. Globe valves are widely used in various industries for throttling and regulating fluid flow, and high-pressure globe valves are engineered to handle the increased forces and pressures that are typically associated with demanding applications.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Jayant Impex trade in all types of raw material, valves and fasteners. If required kindly contact us.

Additional Information:

• Packaging Details: As per client's request

Product Details:

Jayant Impex trade in all types of raw material, valves and fasteners. If required kindly contact us.

Additional Information:

• Packaging Details: As per client's request

Product Details:

Pneumatic Butterfly Valves are very useful to control highly inflammable liquids like Petro-chemicals, Oil, and Gas. It is operated by Pneumatic which allows fast functionality and safe from fire and electric short circuits. So it is an electricity efficient operated valve with the lowest cost.

This pneumatically actuated butterfly valve with a wafer type style connection has a 150 mm (6 inch) orifice. The butterfly valve has a stainless steel housing, stainless steel disc and a EPDM seal. Suitable for liquids and gases from -10degree to 110degree and a maximum pressure 16 bar

All types of valves and fasteners are available. If required kindly contact us.

Additional Information:

• Item Code: Pneumatic-Butterfly-Valves
• Production Capacity: 100
• Delivery Time: 3 Week
• Packaging Details: As per client's request

Product Details:

A choke valve is a mechanical device that induces restriction in a flow line, causing either a pressure drop or a reduction in the rate of flow. See Figure 1. In the context of the upstream oil and gas industry, choke valves are used wherever there is a requirement for wellhead flow and pressure control.

 

Choke valves are used to control flow rate and reduce pressure for processing of produced fluids farther downstream. Effective chokes reduce the likelihood of damage to downstream equipment, support longer lasting production timespans, and alleviate stress from field operators by keeping them away from the wellhead.

All types of valves and fasteners are available. If required kindly contact us.

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: As per client's request

Product Details:

Deluge valve is used to control water flow in Deluge, Pre-Action as well as Foam systems. The valve is held closed by system water pressure trapped in the priming chamber thus keeping the outlet chamber and system piping dry.

 

Deluge systems are designed to protect high-hazard areas such as tunnels, oil refineries, chemical facilities, offshore platforms, and power plants. These locations frequently contain highly flammable, combustible, or materials that require robust fire protection systems.

All types of valves and fasteners are available. If required kindly contact us.

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: As per client's request

Product Details:

Alloy Steel AMS 6304 (17-22A) | UNS K14675 is a structural low alloy steel that demonstrates exceptionally high strength, high-temperature strength, and excellent heat resistance. Because of these traits, AMS 6404 (17-22A) is generally used for manufacturing aviation parts, mechanical parts for engines, industrial furnaces, turbine rotors, petrochemical engineering operations, steam turbines, shafts, studs, fasteners, missile components, and many other similar applications.

Additional Information:

• Item Code: AMS6304
• Delivery Time: 1 Week
• Packaging Details: As per client's request

Product Details:

A cast iron foot valve is a specialized type of check valve commonly used in suction piping systems to prevent the backflow of fluid (usually water) from the discharge side of a pump or a pipeline into the suction line when the pump is not in operation.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Industrial globe valves are used in various applications to control the flow of fluids, including liquids and gases, within pipelines. These valves are designed for precision flow control and regulation.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A cast iron ball valve is designed for controlling the flow of fluids, typically in pipelines carrying water, oil, gas, or other compatible liquids. It features a spherical or ball-shaped closure element within the valve body that can be rotated to open, close, or partially obstruct the flow.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A stainless steel butterfly valve is used to control the flow of liquids or gases in a pipeline. It gets its name from the shape of the valve's disc, which resembles a butterfly. This valve is particularly popular in industries where corrosion resistance and durability are essential, as stainless steel is known for its resistance to rust and corrosion.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Maraging C250 is a specific type of maraging steel, which is a group of high-strength, low-alloy steels known for their exceptional strength and toughness, particularly in applications requiring high performance under extreme conditions. Maraging C250 wire is a form of this steel that is drawn or extruded into wire form.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A cast iron swing check valve is a type of check valve used in pipelines to prevent the reverse flow of fluids. These valves are constructed primarily from cast iron, a durable and corrosion-resistant material, making them suitable for various industrial applications. Cast iron swing check valves are designed with a swinging disc that opens when fluid flows in the desired direction and closes to prevent backflow.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

_{MP35N alloy steel bar is a nickel, chromium, cobalt alloy. This grade is non-magnetic and possesses an ultra-high tensile strength, and provides for good ductility.}

Additional Information:

• Delivery Time: 3 Week
• Packaging Details: As per client's requirment

Product Details:

A cast iron globe valve is a type of industrial valve designed for regulating or throttling the flow of fluids in pipelines. These valves are made primarily from cast iron, a durable material known for its strength and resistance to wear and corrosion.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A cast steel check valve is a type of check valve used in pipelines to prevent the reverse flow of fluids (liquids or gases). These valves are constructed primarily from cast steel, a strong and durable material known for its resistance to high pressures and temperatures.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A cast iron plug valve is a type of industrial valve designed for regulating or stopping the flow of fluids within pipelines. These valves are constructed primarily from cast iron, a durable and corrosion-resistant material. Cast iron plug valves are known for their simple design, versatility, and reliability in various applications.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A pneumatic gate valve uses compressed air or gas to control the flow of fluids or gases in pipelines. These valves are designed with a gate or wedge-like element that is raised or lowered to open or close the valve, thereby controlling the flow.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A bronze gate valve is known for its corrosion resistance, making it an excellent choice for applications involving water, steam, and other corrosive fluids. Gate valves are designed to control the flow of fluids by raising or lowering a gate-like obstruction within the valve body.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Carbon ball valves are used to control the flow of fluids in pipelines. These valves are known for their durability, reliability, and resistance to corrosive environments, making them suitable for a wide range of applications

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A bronze ball valve is typically used in plumbing and industrial applications. It is called a "ball valve" because it uses a spherical ball with a hole (bore) through the center to regulate the flow of the fluid.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Electric valve actuators are devices used to remotely control and automate the operation of various types of valves in industrial and commercial settings. These actuators convert electrical energy into mechanical motion, allowing valves to be opened, closed, or positioned precisely according to the control signals they receive.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

An electric knife gate valve is used to control the flow of liquids or slurries in pipelines. It is called a "knife gate" valve because of its unique design, where a sharp-edged gate is used to cut through the fluid flow. The operation of this valve is typically electrically actuated, allowing for precise and remote control of fluid flow.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A threaded butterfly valve is a type of industrial valve that is designed for controlling the flow of liquids or gases in a pipeline. It is called "threaded" because it typically has threaded connections, which makes it easy to install and remove from the pipeline without the need for welding or soldering.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

Carbon alloy steel valves are industrial valves made from carbon steel with alloying elements added to enhance their mechanical properties and performance characteristics. Carbon steel is a popular material choice for valves due to its strength, durability, and affordability, while alloying elements are introduced to improve corrosion resistance, high-temperature strength, and other specific properties.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A four-way ball valve is a type of valve with four connection ports that allow the diversion or mixing of fluids in different directions. These valves use a spherical ball with a hole (bore) through it to control the flow of fluids. By rotating the ball within the valve body, a four-way ball valve can redirect flow among multiple inlet and outlet ports. This type of valve is commonly used in various industrial applications for tasks such as switching between different pipelines or mixing fluids from multiple sources.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A pneumatic pinch valve uses air pressure to control the flow of a fluid or material through a flexible tube or sleeve. It operates by pinching or compressing the tube, thereby closing off the flow path, and releasing the pressure to open the valve.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A disk check valve allow the flow of fluid in one direction while preventing reverse flow (backflow) in the opposite direction. It is a one-way valve that operates automatically and does not require manual intervention to open or close.

Additional Information:

• Delivery Time: 2 Week
• Packaging Details: As per client's request

Product Details:

A butterfly valve regulates flow by starting, slowing, or stopping media. The disk opens and closes with a low-torque rotation of 90 degrees and works for any compatible application. Because they cost less and are lighter weight, the butterfly valve is often preferred over other types of valves.

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: As per client's request