Tradewell Ferromet Private Limited
Grant Road, Mumbai, Maharashtra
GST No. 27AACCT5386M1ZP
TrustSEAL Verified
Call 0804860195561% Response Rate
SEND EMAIL
 

High Nitrogen Steels

We are a leading Wholesaler of din 1.4472 high nitrogen steel round bar, rods & bars, en x4crnimon21-9-4 / iso x4crnimnmo21-9-4 high nitrogen steel round bar, rods & bars, astm f1586 / iso 5832-9 high nitrogen steel round bar, rods & bars, rex 734 / ugipure 4472 high nitrogen steel round bar, rods & bars and uns s31675 high nitrogen steel round bar, rods & bars from Mumbai, India.

DIN 1.4472 High Nitrogen Steel Round Bar, Rods & Bars

DIN 1.4472 High Nitrogen Steel Round Bar, Rods & Bars
  • DIN 1.4472 High Nitrogen Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 1,436 / KgGet Latest Price

Product Details:

Material GradeDIN 1.4472
BrandJIPL
Usage/ApplicationMedical, Dental
Size10 to 65mm
ShapeRound
Surface FinishBright
Diameter10 to 65mm

Tradewell Ferromet can offer VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route DIN 1.4472 Round Bars, DIN 1.4472 Round Forged Bars, DIN 1.4472 Forged Rods, DIN 1.4472 Black Round Bars, Bright Round Bars, DIN 1.4472 Rolled Round Bars, DIN 1.4472 Peeled Round Bars, DIN 1.4472 Proof Machined Round Bars, DIN 1.4472 Threaded Round Bars, DIN 1.4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for DIN 1.4472 Round Bars: 6mm upto 1200mm

Length for DIN 1.4472 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of DIN 1.4472 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for DIN 1.4472 Round Bars: Bright & Black

DIN 1.4472 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route DIN 1.4472 Round Bars, DIN 1.4472 Round Forged Bars, DIN 1.4472 Forged Rods, DIN 1.4472 Black Round Bars, Bright Round Bars, DIN 1.4472 Rolled Round Bars, DIN 1.4472 Peeled Round Bars, DIN 1.4472 Proof Machined Round Bars, DIN 1.4472 Threaded Round Bars, DIN 1.4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of High Nitrogen Stainless SteelDIN 1.4472 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for High Nitrogen Stainless SteelDIN 1.4472 Round Bars, DIN 1.4472 Round Forged Bars, DIN 1.4472 Forged Rods, DIN 1.4472 Black Round Bars, Bright Round Bars, DIN 1.4472 Rolled Round Bars, DIN 1.4472 Peeled Round Bars, DIN 1.4472 Proof Machined Round Bars, DIN 1.4472 Threaded Round Bars, DIN 1.4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback
Yes! I am interested

EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 High Nitrogen Steel Round Bar, Rods & Bars

EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 High Nitrogen Steel Round Bar, Rods & Bars
  • EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 High Nitrogen Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 1,595 / KgGet Latest Price

Product Details:

Material GradeEN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4
BrandJIPL
Usage/ApplicationMedical, Dental
Size10 to 65mm
ShapeRound
Surface FinishBright
Diameter10 to 65mm

Tradewell Ferromet can offer VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Forged Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Forged Rods, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Black Round Bars, Bright Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Rolled Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Peeled Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Proof Machined Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Threaded Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars: 6mm upto 1200mm

Length for EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars: Bright & Black

EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Forged Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Forged Rods, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Black Round Bars, Bright Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Rolled Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Peeled Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Proof Machined Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Threaded Round Bars, EN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of High Nitrogen Stainless SteelEN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for High Nitrogen Stainless SteelEN X4CrNiMoN21-9-4 / ISO X4CrNiMnMo21-9-4 kindly do contact us.

Request
Callback
Yes! I am interested

ASTM F1586 / ISO 5832-9 High Nitrogen Steel Round Bar, Rods & Bars

ASTM F1586 / ISO 5832-9 High Nitrogen Steel Round Bar, Rods & Bars
  • ASTM F1586 / ISO 5832-9 High Nitrogen Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 1,405 / KgGet Latest Price

Product Details:

Material GradeASTM F1586 / ISO 5832-9
BrandJIPL
Usage/ApplicationMedical, Dental
Size10 to 65mm
ShapeRound
Surface FinishBright
Diameter10 to 65mm

Tradewell Ferromet can offer VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route ASTM F1586 / ISO 5832-9 Round Bars, ASTM F1586 / ISO 5832-9 Round Forged Bars, ASTM F1586 / ISO 5832-9 Forged Rods, ASTM F1586 / ISO 5832-9 Black Round Bars, Bright Round Bars, ASTM F1586 / ISO 5832-9 Rolled Round Bars, ASTM F1586 / ISO 5832-9 Peeled Round Bars, ASTM F1586 / ISO 5832-9 Proof Machined Round Bars, ASTM F1586 / ISO 5832-9 Threaded Round Bars, ASTM F1586 / ISO 5832-9 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for ASTM F1586 / ISO 5832-9 Round Bars: 6mm upto 1200mm

Length for ASTM F1586 / ISO 5832-9 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of ASTM F1586 / ISO 5832-9 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for ASTM F1586 / ISO 5832-9 Round Bars: Bright & Black

ASTM F1586 / ISO 5832-9 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route ASTM F1586 / ISO 5832-9 Round Bars, ASTM F1586 / ISO 5832-9 Round Forged Bars, ASTM F1586 / ISO 5832-9 Forged Rods, ASTM F1586 / ISO 5832-9 Black Round Bars, Bright Round Bars, ASTM F1586 / ISO 5832-9 Rolled Round Bars, ASTM F1586 / ISO 5832-9 Peeled Round Bars, ASTM F1586 / ISO 5832-9 Proof Machined Round Bars, ASTM F1586 / ISO 5832-9 Threaded Round Bars, ASTM F1586 / ISO 5832-9 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of High Nitrogen Stainless SteelASTM F1586 / ISO 5832-9 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for High Nitrogen Stainless SteelASTM F1586 / ISO 5832-9 Round Bars, ASTM F1586 / ISO 5832-9 Round Forged Bars, ASTM F1586 / ISO 5832-9 Forged Rods, ASTM F1586 / ISO 5832-9 Black Round Bars, Bright Round Bars, ASTM F1586 / ISO 5832-9 Rolled Round Bars, ASTM F1586 / ISO 5832-9 Peeled Round Bars, ASTM F1586 / ISO 5832-9 Proof Machined Round Bars, ASTM F1586 / ISO 5832-9 Threaded Round Bars, ASTM F1586 / ISO 5832-9 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Round Bars, Age Hardened Rods, Cold drawn, etc. kindly do contact us.

Request
Callback
Yes! I am interested

Rex 734 / UGIPURE 4472 High Nitrogen Steel Round Bar, Rods & Bars

Rex 734 / UGIPURE 4472 High Nitrogen Steel Round Bar, Rods & Bars
  • Rex 734 / UGIPURE 4472 High Nitrogen Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 1,395 / KgGet Latest Price

Product Details:

Material GradeRex 734 / UGIPURE 4472
BrandJIPL
Usage/ApplicationMedical, Dental
Size10 to 65mm
ShapeRound
Diameter10 to 65mm

Tradewell Ferromet can offer VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route Rex 734 / UGIPURE 4472 Round Bars, Rex 734 / UGIPURE 4472 Round Forged Bars, Rex 734 / UGIPURE 4472 Forged Rods, Rex 734 / UGIPURE 4472 Black Round Bars, Bright Round Bars, Rex 734 / UGIPURE 4472 Rolled Round Bars, Rex 734 / UGIPURE 4472 Peeled Round Bars, Rex 734 / UGIPURE 4472 Proof Machined Round Bars, Rex 734 / UGIPURE 4472 Threaded Round Bars, Rex 734 / UGIPURE 4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for Rex 734 / UGIPURE 4472 Round Bars: 6mm upto 1200mm

Length for Rex 734 / UGIPURE 4472 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of Rex 734 / UGIPURE 4472 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for Rex 734 / UGIPURE 4472 Round Bars: Bright & Black

Rex 734 / UGIPURE 4472 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route Rex 734 / UGIPURE 4472 Round Bars, Rex 734 / UGIPURE 4472 Round Forged Bars, Rex 734 / UGIPURE 4472 Forged Rods, Rex 734 / UGIPURE 4472 Black Round Bars, Bright Round Bars, Rex 734 / UGIPURE 4472 Rolled Round Bars, Rex 734 / UGIPURE 4472 Peeled Round Bars, Rex 734 / UGIPURE 4472 Proof Machined Round Bars, Rex 734 / UGIPURE 4472 Threaded Round Bars, Rex 734 / UGIPURE 4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of High Nitrogen Stainless SteelRex 734 / UGIPURE 4472 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for High Nitrogen Stainless SteelRex 734 / UGIPURE 4472 Round Bars, Rex 734 / UGIPURE 4472 Round Forged Bars, Rex 734 / UGIPURE 4472 Forged Rods, Rex 734 / UGIPURE 4472 Black Round Bars, Bright Round Bars, Rex 734 / UGIPURE 4472 Rolled Round Bars, Rex 734 / UGIPURE 4472 Peeled Round Bars, Rex 734 / UGIPURE 4472 Proof Machined Round Bars, Rex 734 / UGIPURE 4472 Threaded Round Bars, Rex 734 / UGIPURE 4472 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn, Warm Worked Rods, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: Rex-734-UGIPURE-4472-High-Nitrogen-Steel-Round-Bar-Rods-Bars
Yes! I am interested

UNS S31675 High Nitrogen Steel Round Bar, Rods & Bars

UNS S31675 High Nitrogen Steel Round Bar, Rods & Bars
  • UNS S31675 High Nitrogen Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 1,296 / KgGet Latest Price

Product Details:

Material GradeUNS T31675
BrandJIPL
Usage/ApplicationMedical, Dental
Size10 to 65mm
ShapeRound
Surface FinishBright
Diameter10 to 65mm

Tradewell Ferromet can offer VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route UNS S31675 Round Bars, UNS S31675 Round Forged Bars, UNS S31675 Forged Rods, UNS S31675 Black Round Bars, Bright Round Bars, UNS S31675 Rolled Round Bars, UNS S31675 Peeled Round Bars, UNS S31675 Proof Machined Round Bars, UNS S31675 Threaded Round Bars, UNS S31675 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for UNS S31675 Round Bars: 6mm upto 1200mm

Length for UNS S31675 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of UNS S31675 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for UNS S31675 Round Bars: Bright & Black

UNS S31675 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) High Nitrogen Stainless Steel route UNS S31675 Round Bars, UNS S31675 Round Forged Bars, UNS S31675 Forged Rods, UNS S31675 Black Round Bars, Bright Round Bars, UNS S31675 Rolled Round Bars, UNS S31675 Peeled Round Bars, UNS S31675 Proof Machined Round Bars, UNS S31675 Threaded Round Bars, UNS S31675 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of High Nitrogen Stainless SteelUNS S31675 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for High Nitrogen Stainless SteelUNS S31675 Round Bars, UNS S31675 Round Forged Bars, UNS S31675 Forged Rods, UNS S31675 Black Round Bars, Bright Round Bars, UNS S31675 Rolled Round Bars, UNS S31675 Peeled Round Bars, UNS S31675 Proof Machined Round Bars, UNS S31675 Threaded Round Bars, UNS S31675 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: UNS-S31675-High-Nitrogen-Steel-Round-Bar-Rods-Bars
Yes! I am interested
X

Explore More Product

View All Product


Reviews & Rating

4.2/5

★★★★★★★★★★

Reviewed by 155 Users

  • 5★52%
  • 4★13%
  • 3★4%
  • 2★8%
  • 1★23%
  • User Satisfaction
  • Response65%
  • Quality     83%
  • Delivery   85%

Most Relevant Reviews

M
★★★★★★★★★★
07-July-22
Maaz Malik
Ghaziabad, Uttar Pradesh
Product Name : Alloy Steel Scrap
Quality
Response
Quality
Delivery
reviewImg1 reviewImg1
T
★★★★★★★★★★
04-February-21
Trabullah Khan
Thane, Maharashtra
Product Name : Carbon Steel Round Bars
like
Quality
Delivery
S
★★★★★★★★★★
11-August-22
Samadhan Dhikale
Mumbai, Maharashtra
Product Name : Rivet Fastener
Response
Quality
Delivery

View More Reviews




Reach Us
Girish Mehta (Marketing Director)
Tradewell Ferromet Private Limited
Shop No. 6, Ground Floor, Mahimwala Building, Opposite Sardar High School, 12th Khetwadi
Grant Road, Mumbai - 400004, Maharashtra, India


Call Us


Send E-mail