Tradewell Ferromet Private Limited
Grant Road, Mumbai, Maharashtra
GST No. 27AACCT5386M1ZP
TrustSEAL Verified
Call 0804860195576% Response Rate
SEND EMAIL
 

Case Hardened Steels

Providing you the best range of carpenter 158, c-158 case hardening steel round bar, rods & bars, aisi p-6 case hardening steel round bar, rods & bars, uns t51606 case hardening steel round bar, rods & bars, din 1.2735 case hardening steel round bar, rods & bars and en 15nicr14 case hardening steel round bar, rods & bars with effective & timely delivery.

Carpenter 158, C-158 Case Hardening Steel Round Bar, Rods & Bars

Carpenter 158, C-158 Case Hardening Steel Round Bar, Rods & Bars
  • Carpenter 158, C-158 Case Hardening Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 495 / KgGet Latest Price

Product Details:

Usage/ApplicationOil & Gas Industry
Size10 to 400mm
ShapeRound
Material GradeCarpenter 158, C-158
BrandJIPL
Diameter10 to 400mm
GradeCarpenter 158, C-158

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Case Hardening Alloy Steel route Carpenter 158 Round Bars, Carpenter 158 Round Forged Bars, Carpenter 158 Forged Rods, Carpenter 158 Black Round Bars, Bright Round Bars, Carpenter 158 Rolled Round Bars, Carpenter 158 Peeled Round Bars, Carpenter 158 Proof Machined Round Bars, Carpenter 158 Threaded Round Bars, Carpenter 158 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.
Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN
Size Range for Carpenter 158 Round Bars: 6mm upto 1200mm
Length for Carpenter 158 Round Bars: 10mm upto 6000mm depending on material grade & size.
Type of Carpenter 158 Round Bars: Hot Forged & Cold Forged.
Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered
Surface Finish for Carpenter 158 Round Bars: Bright & Black
Carpenter 158 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.
From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Case Hardening Alloy Steel route Carpenter 158 Round Bars, Carpenter 158 Round Forged Bars, Carpenter 158 Forged Rods, Carpenter 158 Black Round Bars, Bright Round Bars, Carpenter 158 Rolled Round Bars, Carpenter 158 Peeled Round Bars, Carpenter 158 Proof Machined Round Bars, Carpenter 158 Threaded Round Bars, Carpenter 158 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.
Client can procure smaller quantities of Case Hardening Alloy SteelCarpenter 158 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.
If any requirements for Case Hardening Alloy SteelCarpenter 158 Round Bars, Carpenter 158 Round Forged Bars, Carpenter 158 Forged Rods, Carpenter 158 Black Round Bars, Bright Round Bars, Carpenter 158 Rolled Round Bars, Carpenter 158 Peeled Round Bars, Carpenter 158 Proof Machined Round Bars, Carpenter 158 Threaded Round Bars, Carpenter 158 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: Carpenter-158-C-158-Case-Hardening-Steel-Round-Bar-Rods-Bars
Yes! I am interested

AISI P-6 Case Hardening Steel Round Bar, Rods & Bars

AISI P-6 Case Hardening Steel Round Bar, Rods & Bars
  • AISI P-6 Case Hardening Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 484 / KgGet Latest Price

Product Details:

Usage/ApplicationOil & Gas Industry
Size10 to 400mm
ShapeRound
Material GradeAISI P-6
BrandJIPL
Diameter10 to 400mm
GradeAISI P-6

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Case Hardening Alloy Steel route AISI P6 Round Bars, AISI P6 Round Forged Bars, AISI P6 Forged Rods, AISI P6 Black Round Bars, Bright Round Bars, AISI P6 Rolled Round Bars, AISI P6 Peeled Round Bars, AISI P6 Proof Machined Round Bars, AISI P6 Threaded Round Bars, AISI P6 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for AISI P6 Round Bars: 6mm upto 1200mm

Length for AISI P6 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of AISI P6 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for AISI P6 Round Bars: Bright & Black

AISI P6 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Case Hardening Alloy Steel route AISI P6 Round Bars, AISI P6 Round Forged Bars, AISI P6 Forged Rods, AISI P6 Black Round Bars, Bright Round Bars, AISI P6 Rolled Round Bars, AISI P6 Peeled Round Bars, AISI P6 Proof Machined Round Bars, AISI P6 Threaded Round Bars, AISI P6 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Case Hardening Alloy SteelAISI P6 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Case Hardening Alloy SteelAISI P6 Round Bars, AISI P6 Round Forged Bars, AISI P6 Forged Rods, AISI P6 Black Round Bars, Bright Round Bars, AISI P6 Rolled Round Bars, AISI P6 Peeled Round Bars, AISI P6 Proof Machined Round Bars, AISI P6 Threaded Round Bars, AISI P6 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: AISI-P-6-Case-Hardening-Steel-Round-Bar-Rods-Bars
Yes! I am interested

UNS T51606 Case Hardening Steel Round Bar, Rods & Bars

UNS T51606 Case Hardening Steel Round Bar, Rods & Bars
  • UNS T51606 Case Hardening Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 526 / KgGet Latest Price

Product Details:

Usage/ApplicationOil & Gas Industry
Size10 to 400mm
ShapeRound
Material GradeUNS T51606
BrandJIPL
Diameter10 to 400mm
GradeUNS T51606

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Case Hardening Alloy Steel route UNS T51606 Round Bars, UNS T51606 Round Forged Bars, UNS T51606 Forged Rods, UNS T51606 Black Round Bars, Bright Round Bars, UNS T51606 Rolled Round Bars, UNS T51606 Peeled Round Bars, UNS T51606 Proof Machined Round Bars, UNS T51606 Threaded Round Bars, UNS T51606 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for UNS T51606 Round Bars: 6mm upto 1200mm

Length for UNS T51606 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of UNS T51606 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for UNS T51606 Round Bars: Bright & Black

UNS T51606 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Case Hardening Alloy Steel route UNS T51606 Round Bars, UNS T51606 Round Forged Bars, UNS T51606 Forged Rods, UNS T51606 Black Round Bars, Bright Round Bars, UNS T51606 Rolled Round Bars, UNS T51606 Peeled Round Bars, UNS T51606 Proof Machined Round Bars, UNS T51606 Threaded Round Bars, UNS T51606 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Case Hardening Alloy SteelUNS T51606 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Case Hardening Alloy SteelUNS T51606 Round Bars, UNS T51606 Round Forged Bars, UNS T51606 Forged Rods, UNS T51606 Black Round Bars, Bright Round Bars, UNS T51606 Rolled Round Bars, UNS T51606 Peeled Round Bars, UNS T51606 Proof Machined Round Bars, UNS T51606 Threaded Round Bars, UNS T51606 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: UNS-T51606-Case-Hardening-Steel-Round-Bar-Rods-Bars
Yes! I am interested

DIN 1.2735 Case Hardening Steel Round Bar, Rods & Bars

DIN 1.2735 Case Hardening Steel Round Bar, Rods & Bars
  • DIN 1.2735 Case Hardening Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 548 / KgGet Latest Price

Product Details:

Usage/ApplicationOil & Gas Industry
Size10 to 400mm
ShapeRound
Material GradeDIN 1.2735
BrandJIPL
Diameter10 to 400mm
GradeDIN 1.2735

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Case Hardening Alloy Steel route DIN 1.2735 Round Bars, DIN 1.2735 Round Forged Bars, DIN 1.2735 Forged Rods, DIN 1.2735 Black Round Bars, Bright Round Bars, DIN 1.2735 Rolled Round Bars, DIN 1.2735 Peeled Round Bars, DIN 1.2735 Proof Machined Round Bars, DIN 1.2735 Threaded Round Bars, DIN 1.2735 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for DIN 1.2735 Round Bars: 6mm upto 1200mm

Length for DIN 1.2735 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of DIN 1.2735 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for DIN 1.2735 Round Bars: Bright & Black

DIN 1.2735 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Case Hardening Alloy Steel route DIN 1.2735 Round Bars, DIN 1.2735 Round Forged Bars, DIN 1.2735 Forged Rods, DIN 1.2735 Black Round Bars, Bright Round Bars, DIN 1.2735 Rolled Round Bars, DIN 1.2735 Peeled Round Bars, DIN 1.2735 Proof Machined Round Bars, DIN 1.2735 Threaded Round Bars, DIN 1.2735 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Case Hardening Alloy SteelDIN 1.2735 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Case Hardening Alloy SteelDIN 1.2735 Round Bars, DIN 1.2735 Round Forged Bars, DIN 1.2735 Forged Rods, DIN 1.2735 Black Round Bars, Bright Round Bars, DIN 1.2735 Rolled Round Bars, DIN 1.2735 Peeled Round Bars, DIN 1.2735 Proof Machined Round Bars, DIN 1.2735 Threaded Round Bars, DIN 1.2735 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.

Request
Callback


Additional Information:

  • Item Code: DIN-1-2735-Case-Hardening-Steel-Round-Bar-Rods-Bars
Yes! I am interested

EN 15NiCr14 Case Hardening Steel Round Bar, Rods & Bars

EN 15NiCr14 Case Hardening Steel Round Bar, Rods & Bars
  • EN 15NiCr14 Case Hardening Steel Round Bar, Rods & Bars
Get Best Quote
Approx. Price: Rs 596 / KgGet Latest Price

Product Details:

Usage/ApplicationAutomobile Industry
Material GradeEN 15NiCr14
Size10 to 400mm
GradeEN 15NiCr14
Single Piece Length2 to 6 meter
Surface FinishingBlack, Bright

Tradewell Ferromet can offer VACUUM DEGASSING (VD) Case Hardening Alloy Steel route EN 15NiCr14 Round Bars, EN 15NiCr14 Round Forged Bars, EN 15NiCr14 Forged Rods, EN 15NiCr14 Black Round Bars, Bright Round Bars, EN 15NiCr14 Rolled Round Bars, EN 15NiCr14 Peeled Round Bars, EN 15NiCr14 Proof Machined Round Bars, EN 15NiCr14 Threaded Round Bars, EN 15NiCr14 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. Produced frpm Scrap Melting in form of Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Fitting, Fastener, Stud or Threaded Rod, Bolt, Screw, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed Pipe, etc. or Virgin Ferro Alloys.

Specifications for Round Bars: As per AISI, SAE, UNS, ASTM, JIS, SS, UNE, STAS, GOST, PN, NS, UNI, ISO, IS, ONORM, NBN, CSA, GB, CSN, BS, EU, EN, SFS, AFNOR NF, DIN, WNr, NP, CSN

Size Range for EN 15NiCr14 Round Bars: 6mm upto 1200mm

Length for EN 15NiCr14 Round Bars: 10mm upto 6000mm depending on material grade & size.

Type of EN 15NiCr14 Round Bars: Hot Forged & Cold Forged.

Heat Treatment for Round Bars: Hot Rolled, Cold Drawn, Solution Annealed, Oil & Water Quenched / Tempered

Surface Finish for EN 15NiCr14 Round Bars: Bright & Black

EN 15NiCr14 Round Bars End Finish: SHEARED / BANSAW CUT / HOT- CUT WITH GRINDING/ Water Jet Cutting.

From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail VACUUM DEGASSING (VD) Case Hardening Alloy Steel route EN 15NiCr14 Round Bars, EN 15NiCr14 Round Forged Bars, EN 15NiCr14 Forged Rods, EN 15NiCr14 Black Round Bars, Bright Round Bars, EN 15NiCr14 Rolled Round Bars, EN 15NiCr14 Peeled Round Bars, EN 15NiCr14 Proof Machined Round Bars, EN 15NiCr14 Threaded Round Bars, EN 15NiCr14 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc.

Client can procure smaller quantities of Case Hardening Alloy SteelEN 15NiCr14 Round Barsonline ready stock from us at premium cost in any destination by just sending us an email.

If any requirements for Case Hardening Alloy SteelEN 15NiCr14 Round Bars, EN 15NiCr14 Round Forged Bars, EN 15NiCr14 Forged Rods, EN 15NiCr14 Black Round Bars, Bright Round Bars, EN 15NiCr14 Rolled Round Bars, EN 15NiCr14 Peeled Round Bars, EN 15NiCr14 Proof Machined Round Bars, EN 15NiCr14 Threaded Round Bars, EN 15NiCr14 Normalized Round Bars, Annealed Round Bars, Heat Treated Round Bars, Quenched (Hardened) & Tempered Round Bars, Age Hardened Rods, Cold drawn & Stress Relieved Rods, Warm Worked Rods, Rods Treated to ferrite-pearlite structure, etc. kindly do contact us.
Request
Callback


Additional Information:

  • Item Code: EN-15NiCr14-Case-Hardening-Steel-Round-Bar-Rods-Bars
Yes! I am interested
X

Explore More Products

View All Products




Reach Us
Girish Mehta (Marketing Director)
Tradewell Ferromet Private Limited
Shop No. 6, Ground Floor, Mahimwala Building, Opposite Sardar High School, 12th Khetwadi
Grant Road, Mumbai - 400004, Maharashtra, India


Call Us


Send E-mail