Alloy Steel Round & Flat Bars

Product Details:

Tradewell Ferromet can offer Alloy Case Hareding Bearing Steel 18nicrmo14-6 mod Bar, Alloy 18nicrmo14-6/Ovako 255 Round Bars, Alloy 18nicrmo14-6/Variant 255Q Bar, Alloy 18nicrmo14-6/Varaint 255G Round Bars, 18nicrmo14 Round Bars, EN 1.3533/B31/ AISI 3316 /20Ch2N4A Case Hardening Bearing Steel Bar. 18nicrmo14-6 mod Nickel-Chromium-Molybdenum Alloy Case Hardening Bearing Steel. Alloy 18nicrmo14-6 is a case hardening steel with high toughness used for bearing and transmission components. There are two different versions of the grade with high cleanliness requirements. The high hardenability ensures a through hardenability of large sections. Bearing quality (BQ) variant with low sulphur content and high cleanliness demands. Isotropic quality (IQ) with isotropic properties and improved fatigue strength due to higher cleanliness levels, and a finer size and distribution of non-metallic inclusions Below is chemical composition for 18NiCrMo14-6: Fe, 93.0599—94.7499 Ni, 3.25— 3.75 Cr, 1.3—1.6 Mn, 0.4—0.7 Si, 0.0—0.4 Mo, 0.15 —0.25 C, 0.15—0.2 P, 0.0—0.025 S, 0.0 - 0.015 From Tradewell Ferromet Pvt Ltd, India, Maharashtra, Khopoli, Mumbai client can avail smaller quantities of Alloy Case Hareding Bearing Steel 18nicrmo14-6 mod Bar, Alloy 18nicrmo14-6/Ovako 255 Round Bars, Alloy 18nicrmo14-6/Variant 255Q Bar, Alloy 18nicrmo14-6/Varaint 255G Round Bars, 18nicrmo14 Round Bars, EN 1.3533/B31/ AISI 3316 /20Ch2N4A Case Hardening Bearing Steel Bar online by sending us an email. If any requirements for Alloy Case Hareding Bearing Steel 18nicrmo14-6 mod Bar, Alloy 18nicrmo14-6/Ovako 255 Round Bars, Alloy 18nicrmo14-6/Variant 255Q Bar, Alloy 18nicrmo14-6/Varaint 255G Round Bars, 18nicrmo14 Round Bars, EN 1.3533/B31/ AISI 3316 /20Ch2N4A Case Hardening Bearing Steel Bar kindly do contact us.

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars.

Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications for Round Bars: 25mm upto 1000mm depending on material grades.

Size Specifications for Square, Flat, Rectangular Bars, Blocks: 6mm upto 400mm in thickness, 500mm to 1000mm length(can be Customized)

Size Specifications for Hollow Bars: 50mm upto 600mm in diameter as welded hollow bars 2inch to 24inch diameter as seamless hollow bars

Size Specifications for Hollow Rings: 50mm upto 2200mm in diameter as welded hollow rings 2inch to 60inch diameter as seamless hollow rings

Chemical composition of Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars:

C: 0.3 - 0.38

Si: max 0.4

Mn: 0.5 - 0.8

Ni: 1.3 - 1.7

P: max 0.025

S: max 0.035

Cr: 1.3 - 1.7

Mo: 0.15 - 0.3

 

Equivalent grades steel number of Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars:

USA SAE / AISI: 4340

Germany DIN,WNr: 1.6582, 34CrNiMo6, GS-34CrNiMo6V

Japan JIS: SNCM447

France AFNOR: 35NCD6

England BS: 817M40

European EN: 1.6582, 34CrNiMo6

Italy UNI: 35NiCrMo6KB, 35CrNiMo6

China GB: 34CrNi3Mo, 34CrNiMo, ZG34CrNiMo

Sweden SS: 2541

Poland PN: 34HNM

Czechia CSN: 16342, 16343, 16444

Russia GOST: 36KH2N2MFA, 38KH2N2MA, 40KHN2MA

Inter ISO: 36CrNiMo6

 

Other possible products of EN 34CrNiMo6 are as follows:

34CrNiMo6 Rods, 34CrNiMo6 Blooms, 34CrNiMo6 Billets, 34CrNiMo6 Bars, 34CrNiMo6 Round Bars, 34CrNiMo6 Flat Bars, 34CrNiMo6 Round Corner Square Bars, 34CrNiMo6 RCS Bars, 34CrNiMo6 Straight Corner Square Bars, 34CrNiMo6 SCS Bars, 34CrNiMo6 Square Bars, 34CrNiMo6 Rectangular Bars, 34CrNiMo6 Hexagonal Bars, 34CrNiMo6 Forged Bars, 34CrNiMo6 Rolled Bars, 34CrNiMo6 Black Bars, 34CrNiMo6 Bright Bars, 34CrNiMo6 Proof Machined Bars, 34CrNiMo6 Hollow Bars, 34CrNiMo6 Normalized Bars, 34CrNiMo6 Annealed Bars, 34CrNiMo6 Hardened (Quenched) Tempered Bars, 34CrNiMo6 Blocks, 34CrNiMo6 Slabs, 34CrNiMo6 Circles, 34CrNiMo6 Patta, 34CrNiMo6 Forgings, 34CrNiMo6 Machined Parts, 34CrNiMo6 Shafts, 34CrNiMo6 Rings, 34CrNiMo6 Hollow Rings, 34CrNiMo6 Seamless Rings, 34CrNiMo6 Forged Seamless Rings, 34CrNiMo6 Rolled Seamless Rings

 

Client can buy smaller quantities of Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars online from our associated manufacturing unit in India at premium cost.

 

 

If any requirements for Chrome Moly Alloy Steel 34CrNiMo6 Round, Square Rectangular Bars kindlydo contact us.

Additional Information:

• Item Code: ChromeMolyAlloySteel34CrNiMo6Square
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 12CrMo9-1 Alloy Steel Bars / 12CrMo9-1 Round Bars / 12CrMo9-1 Bars.

12CrMo9-1 chrome-molybdenum plate is an ideal material for welded pressure vessels and boilers used in elevated temperature service. With excellent resistance to high temperature and corrosion, this type of steel is commonly used in the petrochemical, oil, gas and power generation industry.

 

Also known as ASTM A387 Grade 9 Class 2 ASME SA387 Grade 9 Class 2

Equivalent grades of 12CrMo9-1 Alloy Steel Bars/ 12CrMo9-1 Round Bars / 12CrMo9-1 Bars:

ASTM A213 T9, A335 P9, A182 F9

EU EN: X11CrMo9-1

UNS K90941

Germany DIN,WNr: 1.7386, 12CrMo91

France AFNOR: 11CrMo9-1

 

12CrMo9-1 Alloy Steel Bars / 12CrMo9-1 Round Bars / 12CrMo9-1 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 12CrMo9-1 Alloy Steel Bars / 12CrMo9-1 Round Bars / 12CrMo9-1 Bars in size range of 3mm upto 400mm in diameter.

 

Other possible products of 12CrMo9-1 are as follows:

12CrMo9-1 Rods, 12CrMo9-1 Blooms, 12CrMo9-1 Billets, 12CrMo9-1 Bars, 12CrMo9-1 Round Bars, 12CrMo9-1 Flat Bars, 12CrMo9-1 Round Corner Square Bars, 12CrMo9-1 RCS Bars, 12CrMo9-1 Straight Corner Square Bars, 12CrMo9-1 SCS Bars, 12CrMo9-1 Square Bars, 12CrMo9-1 Rectangular Bars, 12CrMo9-1 Hexagonal Bars, 12CrMo9-1 Forged Bars, 12CrMo9-1 Rolled Bars, 12CrMo9-1 Black Bars, 12CrMo9-1 Bright Bars, 12CrMo9-1 Proof Machined Bars, 12CrMo9-1 Hollow Bars, 12CrMo9-1 Normalized Bars, 12CrMo9-1 Annealed Bars, 12CrMo9-1 Hardened (Quenched) Tempered Bars, 12CrMo9-1 Blocks, 12CrMo9-1 Slabs, 12CrMo9-1 Circles, 12CrMo9-1 Patta, 12CrMo9-1 Flanges, 12CrMo9-1 Slip-On Flanges, 12CrMo9-1 Weld Neck Flanges, 12CrMo9-1 Blind Flanges, 12CrMo9-1 Socket Weld Flanges, 12CrMo9-1 Threaded Flanges, 12CrMo9-1 Lap Joint Flanges, 12CrMo9-1 Long Welding Neck Flanges, 12CrMo9-1 Plate Flanges, 12CrMo9-1 Raised Face Flanges, 12CrMo9-1 Flat Face Flanges, 12CrMo9-1 Ring Type Joint Flanges, 12CrMo9-1 RF Flanges, 12CrMo9-1 FF Flanges, 12CrMo9-1 RTJ Flanges, 12CrMo9-1 Plates, 12CrMo9-1 Sheets, 12CrMo9-1 Coils, 12CrMo9-1 Patti, 12CrMo9-1 Custom Profiles, 12CrMo9-1 Plate Shapes, 12CrMo9-1 Fitting, 12CrMo9-1 Elbow, 12CrMo9-1 45 Degree Elbow, 12CrMo9-1 90 Degree Elbow, 12CrMo9-1 180 Degree Elbow, 12CrMo9-1 Reducer, 12CrMo9-1 Eccentric Reducer, 12CrMo9-1 Concentric Reducer, 12CrMo9-1 Sleeve, 12CrMo9-1 Union, 12CrMo9-1 Forgings, 12CrMo9-1 Machined Parts, 12CrMo9-1 Tube, 12CrMo9-1 Tubing, 12CrMo9-1 Pipes

 

Client can buy smaller quantities of 12CrMo9-1 Alloy Steel Bars / 12CrMo9-1 Round Bars/ 12CrMo9-1 Bars online from our associated manufacturing unit in India at premium cost.

 

If any requirements for 12CrMo9-1 Alloy Steel Bars / 12CrMo9-1 Round Bars / 12CrMo9-1 Bars kindly do contact us.

Additional Information:

• Item Code: 12CrMo91AlloySteelRoundBars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offerX11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars / X11CrMo9-1 Bars.

 

X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 / X11CrMo9-1 Bars Round Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars / X11CrMo9-1 Bars in size range of 3mm upto 400mm in diameter.

 

Equivalent grades of X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars / X11CrMo9-1 Bars:

ASTM A213 T9, A335 P9, A182 F9, A387Gr.9

EU EN: X11CrMo9-1

UNS K90941

Germany DIN,WNr: 1.7386, 12CrMo91

France AFNOR: 11CrMo9-1

 

Chemical composition of X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars / X11CrMo9-1 Bars:

Chromium, Cr: 8 – 10

Molybdenum, Mo: 0.90 - 1.10

Silicon, Si: 1

Manganese, Mn: 0.30 - 0.60

Carbon, C: 0.15

Phosphorous, P: 0.03

Sulfur, S: 0.03

 

Other possible products of X11CrMo9-1 are as follows:

X11CrMo9-1 Rods, X11CrMo9-1 Blooms, X11CrMo9-1 Billets, X11CrMo9-1 Bars, X11CrMo9-1 Round Bars, X11CrMo9-1 Flat Bars, X11CrMo9-1 Round Corner Square Bars, X11CrMo9-1 RCS Bars, X11CrMo9-1 Straight Corner Square Bars, X11CrMo9-1 SCS Bars, X11CrMo9-1 Square Bars, X11CrMo9-1 Rectangular Bars, X11CrMo9-1 Hexagonal Bars, X11CrMo9-1 Forged Bars, X11CrMo9-1 Rolled Bars, X11CrMo9-1 Black Bars, X11CrMo9-1 Bright Bars, X11CrMo9-1 Proof Machined Bars, X11CrMo9-1 Hollow Bars, X11CrMo9-1 Normalized Bars, X11CrMo9-1 Annealed Bars, X11CrMo9-1 Hardened (Quenched) & Tempered Bars, X11CrMo9-1 Blocks, X11CrMo9-1 Slabs, X11CrMo9-1 Circles, X11CrMo9-1 Patta, X11CrMo9-1 Flanges, X11CrMo9-1 Slip-On Flanges, X11CrMo9-1 Weld Neck Flanges, X11CrMo9-1 Blind Flanges, X11CrMo9-1 Socket Weld Flanges, X11CrMo9-1 Threaded Flanges, X11CrMo9-1 Lap Joint Flanges, X11CrMo9-1 Long Welding Neck Flanges, X11CrMo9-1 Plate Flanges, X11CrMo9-1 Raised Face Flanges, X11CrMo9-1 Flat Face Flanges, X11CrMo9-1 Ring Type Joint Flanges, X11CrMo9-1 RF Flanges, X11CrMo9-1 FF Flanges, X11CrMo9-1 RTJ Flanges, X11CrMo9-1 Plates, X11CrMo9-1 Sheets, X11CrMo9-1 Coils, X11CrMo9-1 Patti, X11CrMo9-1 Custom Profiles, X11CrMo9-1 Plate Shapes, X11CrMo9-1 Fitting, X11CrMo9-1 Elbow, X11CrMo9-1 45 Degree Elbow, X11CrMo9-1 90 Degree Elbow, X11CrMo9-1 180 Degree Elbow, X11CrMo9-1 Reducer, X11CrMo9-1 Eccentric Reducer, X11CrMo9-1 Concentric Reducer, X11CrMo9-1 Sleeve, X11CrMo9-1 Union, X11CrMo9-1 Forgings, X11CrMo9-1 Machined Parts, X11CrMo9-1 Tube, X11CrMo9-1 Tubing, X11CrMo9-1 Pipes

 

Client can buy smaller quantities of X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars / X11CrMo9-1 Bars online from our associated manufacturing unit in India at premium cost.

 

If any requirements for X11CrMo9-1 Alloy Steel Bars / X11CrMo9-1 Round Bars  / X11CrMo9-1 Bars kindly do contact us.

Additional Information:

• Item Code: X11CrMo91AlloySteelRoundBars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars.

 

Equivalent grades of DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars:

ASTM A335 P5, ASTM A182 F5, ASTM A213 T5, A387Gr.5

EU EN: 1.7362, 5CrMo16, X12CrMo5

USA AISI: 501, 502, K41545, S50100, S50200, T12005, T51605

Germany DIN,WNr: 1.7362, 12CrMo19-5, T5, X12CrMo5

Japan JIS: SFVAB5A, STBA25, STC48, STFA25, STPA25

France AFNOR: 710CD5-05, Z15CD5-05, Z20CD5

Italy UNI: A16CrMo25-5KG, A16CrMo25-5KW

China GB: 10MoCr50

Hungary MSZ: 12CrMo20-5

Poland PN: H5M

Czechia CSN: 17102

Romania STAS: 10MoCr50

 

DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars in size range of 3mm upto 400mm in diameter.

 

Chemical composition of DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars:

 

Client can buy smaller quantities of DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars online from our associated manufacturing unit in India at premium cost.

 

If any requirements for DIN 1.7362 Alloy Steel Bars / 1.7362 Round Bars / 1.7362 Bars kindly do contact us.

Additional Information:

• Item Code: DIN17362AlloySteelRoundBars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer AFNOR 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars.

AFNOR 25CD4 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. The steel has good strength and toughness, weldability and machinability.

AFNOR 25CD4 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 600º F (315º C). It shows good overall combinations of strength, toughness. and fatigue strength.

 

The following are some of the major applications of AFNOR 25CD4 alloy steel:

Aircraft engine mounts

Welded tubing

Chasis Making

Gokart Structure

Bicycle Structure

 

AFNOR 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer AFNOR 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars in size range of 22mm upto 800mm in diameter.

 

Chemical composition of AFNOR 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars:

Element: Percentage

Fe: Balance

Cr: 0.80-1.10%

Mn: 0.40-0.60%

C: 0.28-0.33%

Si: 0.15%-0.30%

Mo: 0.15-0.25%

S: 0.040% max

P: 0.035% max

 

Other possible products of AFNOR 25CD4 are as follows:

AFNOR 25CD4 Rods, AFNOR 25CD4 Blooms, AFNOR 25CD4 Billets, AFNOR 25CD4 Bars, AFNOR 25CD4 Round Bars, AFNOR 25CD4 Flat Bars, AFNOR 25CD4 Round Corner Square Bars, AFNOR 25CD4 RCS Bars, AFNOR 25CD4 Straight Corner Square Bars, AFNOR 25CD4 SCS Bars, AFNOR 25CD4 Square Bars, AFNOR 25CD4 Rectangular Bars, AFNOR 25CD4 Hexagonal Bars, AFNOR 25CD4 Forged Bars, AFNOR 25CD4 Rolled Bars, AFNOR 25CD4 Black Bars, AFNOR 25CD4 Bright Bars, AFNOR 25CD4 Proof Machined Bars, AFNOR 25CD4 Hollow Bars, AFNOR 25CD4 Normalized Bars, AFNOR 25CD4 Annealed Bars, AFNOR 25CD4 Hardened (Quenched) Tempered Bars, AFNOR 25CD4 Blocks, AFNOR 25CD4 Slabs, AFNOR 25CD4 Circles, AFNOR 25CD4 Patta, AFNOR 25CD4 Flanges, AFNOR 25CD4 Slip-On Flanges, AFNOR 25CD4 Weld Neck Flanges, AFNOR 25CD4 Blind Flanges, AFNOR 25CD4 Socket Weld Flanges, AFNOR 25CD4 Threaded Flanges, AFNOR 25CD4 Lap Joint Flanges, AFNOR 25CD4 Long Welding Neck Flanges, AFNOR 25CD4 Plate Flanges, AFNOR 25CD4 Raised Face Flanges, AFNOR 25CD4 Flat Face Flanges, AFNOR 25CD4 Ring Type Joint Flanges, AFNOR 25CD4 RF Flanges, AFNOR 25CD4 FF Flanges, AFNOR 25CD4 RTJ Flanges, AFNOR 25CD4 Plates, AFNOR 25CD4 Custom Profiles, AFNOR 25CD4 Plate Shapes, AFNOR 25CD4 Fitting, AFNOR 25CD4 Elbow, AFNOR 25CD4 45 Degree Elbow, AFNOR 25CD4 90 Degree Elbow, AFNOR 25CD4 180 Degree Elbow, AFNOR 25CD4 Reducer, AFNOR 25CD4 Eccentric Reducer, AFNOR 25CD4 Concentric Reducer, AFNOR 25CD4 Sleeve, AFNOR 25CD4 Union, AFNOR 25CD4 Forgings, AFNOR 25CD4 Machined Parts, AFNOR 25CD4 Shafts, AFNOR 25CD4 Tube, AFNOR 25CD4 Tubing, AFNOR 25CD4 Pipes, AFNOR 25CD4 Seamless Tube, AFNOR 25CD4 Seamless Tubing, AFNOR 25CD4 Seamless Pipes.

 

Client can buy smaller quantities of 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 25CD4 Alloy Steel Bars / 25CD4 Round Bars / 25CD4 Flat Bars kindly do contact us.

Additional Information:

• Item Code: 25cd4-alloy-steel-bars-25cd4-round-bars-25cd4-flat-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars.

 

Equivalent steel number of 20NCD2 / 8620:

USA SAE / AISI: 8617, 8620, 8620H, 8620RH, G86170, G86200, H86170, H86200, J11442, K12147

Germany DIN,WNr: 1.6523, 21NiCrMo2, 21NiCrMo2-2

Japan JIS: SNCM220, SNCM220H

France AFNOR: 20NCD2, 20NiCrMo2, 22NCD2

England BS: 20NiCrMo2-2, 805H20, 805M20, 806M20

European EN: 1.6523, 20MoCr2-2, 20NiCrMo2, 20NiCrMo2-2, 20NiCrMo2KD

Italy UNI: 20NiCrMo2

Spain UNE: 20NiCrMo2, 20NiCrMo2-2, 20NiCrMo3-1

China GB: 20CrNiMo, 20CrNiMoH, G20CrNiMo

Sweden SS: 2506

Poland PN: 20HNM, 20HNMA

Finland SFS: 21NiCrMo2

Australia AS: 8617, 8617H, 8620, 8620H

South Korea KS: SNCM220, SNCM220H

 

20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars in size range of 25mm upto 400mm in diameter.

 

Chemical composition of 20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars:

 

Other possible products of AFNOR 20NCD2 are as follows:

AFNOR 20NCD2 Rods, AFNOR 20NCD2 Blooms, AFNOR 20NCD2 Billets, AFNOR 20NCD2 Bars, AFNOR 20NCD2 Round Bars, AFNOR 20NCD2 Flat Bars, AFNOR 20NCD2 Round Corner Square Bars, AFNOR 20NCD2 RCS Bars, AFNOR 20NCD2 Straight Corner Square Bars, AFNOR 20NCD2 SCS Bars, AFNOR 20NCD2 Square Bars, AFNOR 20NCD2 Rectangular Bars, AFNOR 20NCD2 Hexagonal Bars, AFNOR 20NCD2 Forged Bars, AFNOR 20NCD2 Rolled Bars, AFNOR 20NCD2 Black Bars, AFNOR 20NCD2 Bright Bars, AFNOR 20NCD2 Proof Machined Bars, AFNOR 20NCD2 Hollow Bars, AFNOR 20NCD2 Normalized Bars, AFNOR 20NCD2 Annealed Bars, AFNOR 20NCD2 Hardened (Quenched) Tempered Bars, AFNOR 20NCD2 Blocks, AFNOR 20NCD2 Slabs, AFNOR 20NCD2 Circles, AFNOR 20NCD2 Patta, AFNOR 20NCD2 Forgings, AFNOR 20NCD2 Machined Parts, AFNOR 20NCD2 Shafts.

 

Client can buy smaller quantities of 20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 20NCD2 Alloy Steel Bars / 20NCD2 Round Bars / 20NCD2 Bars kindly do contact us.

Additional Information:

• Item Code: 20ncd2-alloy-steel-bars-20ncd2-round-bars-20ncd2-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar.

 

Alloy steel 1.6522 is a case-hardening steel containing nickel, chromium and molybdenum as alloying elements. The alloy shows good strength and toughness properties, and has a higher core strength than grades 8615 and 8617.

 

Applications of DIN 1.6522:

This alloy may be used in the production of medium-strength parts such as forged camshafts, fasteners and gears.

 

DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar in size range of 3mm upto 400mm in diameter.

 

Chemical composition of DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar:

 

Other possible products of DIN 1.6522 are as follows:

DIN 1.6522 Rods, DIN 1.6522 Blooms, DIN 1.6522 Billets, DIN 1.6522 Bars, DIN 1.6522 Round Bars, DIN 1.6522 Flat Bars, DIN 1.6522 Round Corner Square Bars, DIN 1.6522 RCS Bars, DIN 1.6522 Straight Corner Square Bars, DIN 1.6522 SCS Bars, DIN 1.6522 Square Bars, DIN 1.6522 Rectangular Bars, DIN 1.6522 Hexagonal Bars, DIN 1.6522 Forged Bars, DIN 1.6522 Rolled Bars, DIN 1.6522 Black Bars, DIN 1.6522 Bright Bars, DIN 1.6522 Proof Machined Bars, DIN 1.6522 Hollow Bars, DIN 1.6522 Normalized Bars, DIN 1.6522 Annealed Bars, DIN 1.6522 Hardened (Quenched) Tempered Bars, DIN 1.6522 Blocks, DIN 1.6522 Slabs, DIN 1.6522 Circles, DIN 1.6522 Patta, DIN 1.6522 Forgings, DIN 1.6522 Machined Parts, DIN 1.6522 Shafts.

 

Client can buy smaller quantities of DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar online from our associated manufacturing unit in India at premium cost.

If any requirements for DIN 1.6522 Alloy Steel Bars / 1.6522 Round Bars / 1.6522 Bar kindly do contact us.

Additional Information:

• Item Code: din-16522-alloy-steel-bars-16522-round-bars-16522-bar
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer EN24 Alloy Steel Bars, EN Round Bars, EN24 Flat Bars.

Alloy Steel Chrome Moly EN24T / 817m40 / EN24 is usually supplied in the T condition with a tensile strength of 850/1000 N/mm2.

EN24T steel is a popular grade of through-hardening alloy steel due to its excellent machinability in the "T" condition. EN24T is used in components such as gears, shafts, studs and bolts, its hardness is in the range 248/302 HB. EN24T can be further surface-hardened to create components with enhanced wear resistance by induction or nitriding processing.

 

EN24 Alloy Steel Bars, EN Round Bars, EN24 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

Size Specifications: Can offer EN24 Alloy Steel Bars, EN Round Bars, EN24 Flat Bars in size range of 22mm upto 600mm in diameter.

Chemical composition of EN24 Alloy Steel Bars, EN Round Bars, EN24 Flat Bars:

Element: Percentage

C: 0.36/0.44

Si: 0.10/0.35

Mn: 0.45/0.70

S: 0.040 max

P: 0.035 max

Cr: 1.00/1.40

Mo: 0.20/0.35

Ni: 1.30/1.70

 

Other possible products of Alloy Steel EN24 are as follows:

EN24 Rods, EN24 Blooms, EN24 Billets, EN24 Bars, EN24 Round Bars, EN24 Flat Bars, EN24 Round Corner Square Bars, EN24 RCS Bars, EN24 Straight Corner Square Bars, EN24 SCS Bars, EN24 Square Bars, EN24 Rectangular Bars, EN24 Hexagonal Bars, EN24 Forged Bars, EN24 Rolled Bars, EN24 Black Bars, EN24 Bright Bars, EN24 Proof Machined Bars, EN24 Hollow Bars, EN24 Normalized Bars, EN24 Annealed Bars, EN24 Hardened (Quenched) Tempered Bars, EN24 Blocks, EN24 Slabs, EN24 Circles, EN24 Patta, EN24 Forgings, EN24 Machined Parts, EN24 Shafts.

Other possible products of Alloy Steel 817M40 are as follows:

817M40 Rods, 817M40 Blooms, 817M40 Billets, 817M40 Bars, 817M40 Round Bars, 817M40 Flat Bars, 817M40 Round Corner Square Bars, 817M40 RCS Bars, 817M40 Straight Corner Square Bars, 817M40 SCS Bars, 817M40 Square Bars, 817M40 Rectangular Bars, 817M40 Hexagonal Bars, 817M40 Forged Bars, 817M40 Rolled Bars, 817M40 Black Bars, 817M40 Bright Bars, 817M40 Proof Machined Bars, 817M40 Hollow Bars, 817M40 Normalized Bars, 817M40 Annealed Bars, 817M40 Hardened (Quenched) Tempered Bars, 817M40 Blocks, 817M40 Slabs, 817M40 Circles, 817M40 Patta, 817M40 Forgings, 817M40 Machined Parts, 817M40 Shafts.

Client can buy smaller quantities of EN24 Alloy Steel Bars, EN Round Bars, Alloy Steel Chrome Moly EN24 Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for EN24 Alloy Steel Bars, EN Round Bars, Alloy Steel Chrome Moly EN24 Flat Bars kindlydo contact us.

Additional Information:

• Item Code: sncm439-alloy-steel-bars-sncm439-round-bars-sncm439-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars.

 

EN362 grade steel is a low alloy case hardening steel. After carburising / carbonitriding and hardening, it produces a hard wear resistant case with a tough core and good resistance to shock. The ‘as quenched’ surface hardness usually ranges from 37-43HRc. This grade demonstrates reasonably high hardenability, and excellent forgeability and weldability.

Typical applications of EN362 grade steel are Gears, Pins, Shafts, Camshafts, Drive wheels, Clutch plates, etc.

 

EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars in size range of 3mm upto 400mm in diameter.

 

Chemical composition of EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars:

Element: Percentage

Manganese, Mn: 0.700-0.900

Nickel, Ni: 0.400-0.700

Chromium, Cr: 0.400-0.600

Carbon, C: 0.180-0.230

Silicon, Si: 0.150-0.350

Molybdenum, Mo: 0.150-0.250

Sulfur, S: ≤ 0.0400

Phosphorous, P: ≤ 0.0350

 

Other possible products of EN362 are as follows:

EN362 Rods, EN362 Blooms, EN362 Billets, EN362 Bars, EN362 Round Bars, EN362 Flat Bars, EN362 Round Corner Square Bars, EN362 RCS Bars, EN362 Straight Corner Square Bars, EN362 SCS Bars, EN362 Square Bars, EN362 Rectangular Bars, EN362 Hexagonal Bars, EN362 Forged Bars, EN362 Rolled Bars, EN362 Black Bars, EN362 Bright Bars, EN362 Proof Machined Bars, EN362 Hollow Bars, EN362 Normalized Bars, EN362 Annealed Bars, EN362 Hardened (Quenched) Tempered Bars, EN362 Blocks, EN362 Slabs, EN362 Circles, EN362 Patta, EN362 Forgings, EN362 Machined Parts, EN362 Shafts.

 

Client can buy smaller quantities of EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for EN362 Alloy Steel Bars, EN362 Round Bars, EN362 Flat Bars kindly do contact us.

Additional Information:

• Item Code: scm440h-alloy-steel-bars-scm440h-round-bars-scm440h-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars.

 

GOST 20KHM, 30KHM, 30KHMA steel is usually supplied as round bar commonly in the hardened and tempered condition. GOST 20KHM, 30KHM, 30KHMA steel should be forged between 2250 and 1750 º F (1230 and 950 º C.) The lower the finishing temperature from forging, the finer will be the grain size. If the alloy is forged at too low a temperature, there is a risk of the formation of a non-uniform structure in certain areas of the forged part, necessitating a normalizing treatment – prior to further heat treatment – after forging.

 

20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars in size range of 25mm upto 500mm in diameter.

 

Chemical composition of 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars:

 

Mechanical properties of 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars:

 

Brinell hardness (HBW): (+S) = 255

Brinell hardness (HBW): (+A) = 212

Vickers hardness ( HV): (+A) = 175

Vickers hardness ( HV): (+QT) = 305 – 435

 

Client can buy smaller quantities of 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 20KHM Alloy Steel Bars, 30KHM Round Bars, 30KHMA Flat Bars kindly do contact us.

Additional Information:

• Item Code: 35khm-alloy-steel-bars-38khm-round-bars-38khm-flat-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars.

 

42CrMo4 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications. Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content. The higher carbon content of 42CrMo4 steel gives greater strength and heat treatment capabilities in comparison to AISI / ASTM 4130 alloy steels, however it does have inferior weldability characteristics.

 

42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars in size range of 10mm upto 800mm in diameter.

 

Chemical composition of 42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars:

Element: Percentage

C: 0.38-0.45

Mn: 0.60-0.90

Si: 0.40 max

P: 0.035 max

S: 0.035 max

Cr: 0.90-1.20

Mo: 0.15-0.30

 

Other possible products of 42CrMo4 are as follows:

42CrMo4 Rods, 42CrMo4 Blooms, 42CrMo4 Billets, 42CrMo4 Bars, 42CrMo4 Round Bars, 42CrMo4 Flat Bars, 42CrMo4 Round Corner Square Bars, 42CrMo4 RCS Bars, 42CrMo4 Straight Corner Square Bars, 42CrMo4 SCS Bars, 42CrMo4 Square Bars, 42CrMo4 Rectangular Bars, 42CrMo4 Hexagonal Bars, 42CrMo4 Forged Bars, 42CrMo4 Rolled Bars, 42CrMo4 Black Bars, 42CrMo4 Bright Bars, 42CrMo4 Proof Machined Bars, 42CrMo4 Hollow Bars, 42CrMo4 Normalized Bars, 42CrMo4 Annealed Bars, 42CrMo4 Hardened (Quenched) Tempered Bars, 42CrMo4 Blocks, 42CrMo4 Slabs, 42CrMo4 Circles, 42CrMo4 Patta, 42CrMo4 Forgings, 42CrMo4 Machined Parts, 42CrMo4 Shafts.

 

Client can buy smaller quantities of 42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 42CrMo4 Alloy Steel Bars / 42CrMo4 Round Bars / 42CrMo4 Bars kindly do contact us.

Additional Information:

• Item Code: 42crmo4-alloy-steel-bars-42crmo4-round-bars-42crmo4-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars.

 

GOST 35KHM, 38KHM is a chromium-molybdenum alloy steel. The chromium content provides good hardness penetration, and the molybdenum content ensures uniform hardness and high strength. GOST 35KHM, 38KHM chrome-molybdenum steel can be oil hardened to a relatively high level of hardness. The desirable properties of the GOST 35KHM, 38KHM include superior toughness, good ductility and good wear resistance in the quenched and tempered condition.

 

35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars in size range of 10mm upto 1200mm in diameter.

 

Chemical composition of 35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars:

Element: Percentage

Carbon, C: 0.380 - 0.430 %

Chromium, Cr: 0.80 - 1.10 %

Iron, Fe: 96.785 - 97.77 % (As remainder)

Manganese, Mn: 0.75 - 1.0 %

Molybdenum, Mo: 0.15 - 0.25 %

Phosphorous, P: ≤ 0.035 %

Silicon, Si: 0.15 - 0.30 %

Sulfur, S: ≤ 0.040 %

 

Other possible products of GOST 35KHM 38KHM are as follows:

GOST 35KHM 38KHM Rods, GOST 35KHM 38KHM Blooms, GOST 35KHM 38KHM Billets, GOST 35KHM 38KHM Bars, GOST 35KHM 38KHM Round Bars, GOST 35KHM 38KHM Flat Bars, GOST 35KHM 38KHM Round Corner Square Bars, GOST 35KHM 38KHM RCS Bars, GOST 35KHM 38KHM Straight Corner Square Bars, GOST 35KHM 38KHM SCS Bars, GOST 35KHM 38KHM Square Bars, GOST 35KHM 38KHM Rectangular Bars, GOST 35KHM 38KHM Hexagonal Bars, GOST 35KHM 38KHM Forged Bars, GOST 35KHM 38KHM Rolled Bars, GOST 35KHM 38KHM Black Bars, GOST 35KHM 38KHM Bright Bars, GOST 35KHM 38KHM Proof Machined Bars, GOST 35KHM 38KHM Hollow Bars, GOST 35KHM 38KHM Normalized Bars, GOST 35KHM 38KHM Annealed Bars, GOST 35KHM 38KHM Hardened (Quenched) Tempered Bars, GOST 35KHM 38KHM Blocks, GOST 35KHM 38KHM Slabs, GOST 35KHM 38KHM Circles, GOST 35KHM 38KHM Patta, GOST 35KHM 38KHM Forgings, GOST 35KHM 38KHM Machined Parts, GOST 35KHM 38KHM Shafts.

 

Client can buy smaller quantities of 35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 35KHM Alloy Steel Bars, 38KHM Round Bars, 38KHM Flat Bars kindly do contact us.

Additional Information:

• Item Code: 20khm-alloy-steel-bars-30khm-round-bars-30khm-flat-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6.

 

DIN 40NiCrMo6 is a low-alloy case-hardened steel containing chromium and molybdenum and nickel as strengthening agents. The steel has good strength and toughness. DIN 40NiCrMo6 is used for highly stressed components in mechanical engineering, vehicle construction as well as aerospace industry. 

 

DIN 40NiCrMo6 alloy steel is a heat treatable and low alloy steel containing chromium, nickel and molybdenum. It has high toughness and strength in the heat treated condition. 

DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6 can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6 in size range of 22mm upto 450mm in diameter.

 

Chemical composition of DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6:

 

Other possible products of DIN 40NiCrMo6 are as follows:

40NiCrMo6 Rods, 40NiCrMo6 Blooms, 40NiCrMo6 Billets, 40NiCrMo6 Bars, 40NiCrMo6 Round Bars, 40NiCrMo6 Flat Bars, 40NiCrMo6 Round Corner Square Bars, 40NiCrMo6 RCS Bars, 40NiCrMo6 Straight Corner Square Bars, 40NiCrMo6 SCS Bars, 40NiCrMo6 Square Bars, 40NiCrMo6 Rectangular Bars, 40NiCrMo6 Hexagonal Bars, 40NiCrMo6 Forged Bars, 40NiCrMo6 Rolled Bars, 40NiCrMo6 Black Bars, 40NiCrMo6 Bright Bars, 40NiCrMo6 Proof Machined Bars, 40NiCrMo6 Hollow Bars, 40NiCrMo6 Normalized Bars, 40NiCrMo6 Annealed Bars, 40NiCrMo6 Hardened (Quenched) Tempered Bars, 40NiCrMo6 Blocks, 40NiCrMo6 Slabs, 40NiCrMo6 Circles, 40NiCrMo6 Patta, 40NiCrMo6 Forgings, 40NiCrMo6 Machined Parts, 40NiCrMo6 Shafts.

 

Client can buy smaller quantities of DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6 online from our associated manufacturing unit in India at premium cost.

 

If any requirements for DIN 40NiCrMo6 Alloy Steel Bars / 40NiCrMo6 Round Bars/ 40NiCrMo6 kindly do contact us.

Additional Information:

• Item Code: 40nicrmo6-alloy-steel-bars-40nicrmo6-round-bars-40nicrmo6
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7.

 

Equivalent steel number of 40NiCrMo7 / 4340:

USA SAE / AISI: 4340, 9840, G43400, G43406, G98400, Gr.9840

Germany DIN,WNr: 1.6511, 1.6565, 1.7225, 34CrNiMo6, 36CrNiMo4, 36NiCrMo4, 40NiCrMo6, 42CrMo4, G36CrNiMo4

Japan JIS: SNCM439, SNCM447

France AFNOR: 35NCD5, 35NCD6, 36NiCrMo4, 40NCD3, 42CD4TS

England BS: 34CrNiMo6, 36NiCrMo4, 708M40, 816M40, 817A37, 817M37, 817M40, 818M40

European EN: 1.6511, 1.6582, 34CrNiMo6, 36CrNiMo4, 40NiCrMo4KD

Italy UNI: 35NiCrMo6KB, 36NiCrMo4, 38NiCrMo4, 38NiCrMo4KB, 40NiCrMo7

Spain UNE: 35NiCrMo4, 36CrNiMo4, 42CrMo4, F.1280

Bulgaria BDS: 36CrNiMo4, 40ChN2MA

Hungary MSZ: 36CrNiMo4

Poland PN: 36HNM, 40HNMA

Romania STAS: T35MoCrNi08

Czechia CSN: 16341, 16342

 

40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7 can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7 in size range of 22mm upto 600mm in diameter.

 

Chemical composition of 40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7:

Element: Percentage

0.37-0.44% C

0.15-0.40% Si

0.50-0.80% Mn

max. 0.035% P

max. 0.035% S

0.60-0.90% Cr

0.20-0.30% Mo

1.60-1.90% Ni

 

Other possible products of 40NiCrMo7 are as follows:

40NiCrMo7 Rods, 40NiCrMo7 Blooms, 40NiCrMo7 Billets, 40NiCrMo7 Bars, 40NiCrMo7 Round Bars, 40NiCrMo7 Flat Bars, 40NiCrMo7 Round Corner Square Bars, 40NiCrMo7 RCS Bars, 40NiCrMo7 Straight Corner Square Bars, 40NiCrMo7 SCS Bars, 40NiCrMo7 Square Bars, 40NiCrMo7 Rectangular Bars, 40NiCrMo7 Hexagonal Bars, 40NiCrMo7 Forged Bars, 40NiCrMo7 Rolled Bars, 40NiCrMo7 Black Bars, 40NiCrMo7 Bright Bars, 40NiCrMo7 Proof Machined Bars, 40NiCrMo7 Hollow Bars, 40NiCrMo7 Normalized Bars, 40NiCrMo7 Annealed Bars, 40NiCrMo7 Hardened (Quenched) Tempered Bars, 40NiCrMo7 Blocks, 40NiCrMo7 Slabs, 40NiCrMo7 Circles, 40NiCrMo7 Patta, 40NiCrMo7 Forgings, 40NiCrMo7 Machined Parts, 40NiCrMo7 Shafts.

 

 

Client can buy smaller quantities of 40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7 online from our associated manufacturing unit in India at premium cost.

If any requirements for 40NiCrMo7 Alloy Steel Bars / 40NiCrMo7 Round Bars/ 40NiCrMo7 kindly do contact us.

Additional Information:

• Item Code: 40nicrmo7-alloy-steel-bars-40nicrmo7-round-bars-40nicrmo7
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars.

 

SCM440 steel is a general alloy steel grade as per JIS Japanese standard. It’s one of the chromium, molybdenum, manganese low alloyed carbon steel.SCM440 is also a medium hardenability steel. After heat treatment, it has good strength, comprehensive mechanical properties, and good manufacturability.

 

SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars in size range of 25mm upto 400mm in diameter.

 

Chemical composition of SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars:

Element: Percentage

Carbon: 0.38/0.43

Silicon: 0.15/0.35

Manganese: 0.60/0.85
Chromium: 0.90/1.20

Molybdenum: 0.15/0.30

 

Other possible products of JIS SCM440 are as follows:

JIS SCM440 Rods, JIS SCM440 Blooms, JIS SCM440 Billets, JIS SCM440 Bars, JIS SCM440 Round Bars, JIS SCM440 Flat Bars, JIS SCM440 Round Corner Square Bars, JIS SCM440 RCS Bars, JIS SCM440 Straight Corner Square Bars, JIS SCM440 SCS Bars, JIS SCM440 Square Bars, JIS SCM440 Rectangular Bars, JIS SCM440 Hexagonal Bars, JIS SCM440 Forged Bars, JIS SCM440 Rolled Bars, JIS SCM440 Black Bars, JIS SCM440 Bright Bars, JIS SCM440 Proof Machined Bars, JIS SCM440 Hollow Bars, JIS SCM440 Normalized Bars, JIS SCM440 Annealed Bars, JIS SCM440 Hardened (Quenched) Tempered Bars, JIS SCM440 Blocks, JIS SCM440 Slabs, JIS SCM440 Circles, JIS SCM440 Patta, JIS SCM440 Forgings, JIS SCM440 Machined Parts, JIS SCM440 Shafts.

 

Client can buy smaller quantities of SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for SCM440 Alloy Steel Bars / SCM440 Round Bars / SCM440 Bars kindly do contact us.

Additional Information:

• Item Code: en362-alloy-steel-bars-en362-round-bars-en362-flat-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars.

 

Alloy Steel 30CrMo4, also referred to as Chromoly Steel and 30CrMo4, is a chromium and molybdenum alloy steel. Known for its responsiveness to mechanical and heat treatments, Alloy Steel 30CrMo4 is weldable by most commercially popular methods. Cold working is possible and forming often takes place in the annealed condition. It is important to note that the machining of Alloy Steel 30CrMo4 is difficult when the hardness of the alloy increases. Alloy Steel 30CrMo4 is popular in a number of critical industries such as aerospace, automotive, and oil and gas.

 

30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars in size range of 25mm upto 750mm in diameter.

 

Chemical composition of 30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars:

Element: Percentage

Fe: Balance

Cr: 0.80-1.10%

Mn: 0.40-0.60%

C: 0.28-0.33%

Si: 0.15%-0.30%

Mo: 0.15-0.25%

S: 0.040% max

P: 0.035% max

 

Other possible products of 30CrMo4 are as follows:

30CrMo4 Rods, 30CrMo4 Blooms, 30CrMo4 Billets, 30CrMo4 Bars, 30CrMo4 Round Bars, 30CrMo4 Flat Bars, 30CrMo4 Round Corner Square Bars, 30CrMo4 RCS Bars, 30CrMo4 Straight Corner Square Bars, 30CrMo4 SCS Bars, 30CrMo4 Square Bars, 30CrMo4 Rectangular Bars, 30CrMo4 Hexagonal Bars, 30CrMo4 Forged Bars, 30CrMo4 Rolled Bars, 30CrMo4 Black Bars, 30CrMo4 Bright Bars, 30CrMo4 Proof Machined Bars, 30CrMo4 Hollow Bars, 30CrMo4 Normalized Bars, 30CrMo4 Annealed Bars, 30CrMo4 Hardened (Quenched) Tempered Bars, 30CrMo4 Blocks, 30CrMo4 Slabs, 30CrMo4 Circles, 30CrMo4 Patta, 30CrMo4 Flanges, 30CrMo4 Slip-On Flanges, 30CrMo4 Weld Neck Flanges, 30CrMo4 Blind Flanges, 30CrMo4 Socket Weld Flanges, 30CrMo4 Threaded Flanges, 30CrMo4 Lap Joint Flanges, 30CrMo4 Long Welding Neck Flanges, 30CrMo4 Plate Flanges, 30CrMo4 Raised Face Flanges, 30CrMo4 Flat Face Flanges, 30CrMo4 Ring Type Joint Flanges, 30CrMo4 RF Flanges, 30CrMo4 FF Flanges, 30CrMo4 RTJ Flanges, 30CrMo4 Plates, 30CrMo4 Custom Profiles, 30CrMo4 Plate Shapes, 30CrMo4 Fitting, 30CrMo4 Elbow, 30CrMo4 45 Degree Elbow, 30CrMo4 90 Degree Elbow, 30CrMo4 180 Degree Elbow, 30CrMo4 Reducer, 30CrMo4 Eccentric Reducer, 30CrMo4 Concentric Reducer, 30CrMo4 Sleeve, 30CrMo4 Union, 30CrMo4 Forgings, 30CrMo4 Machined Parts, 30CrMo4 Shafts, 30CrMo4 Tube, 30CrMo4 Tubing, 30CrMo4 Pipes, 30CrMo4 Seamless Tube, 30CrMo4 Seamless Tubing, 30CrMo4 Seamless Pipes.

Client can buy smaller quantities of 30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars online from our associated manufacturing unit in India at premium cost.

 

If any requirements for 30CrMo4 Alloy Steel Bars / 30CrMo4 Round Bars / 30CrMo4 Bars kindly do contact us.

Additional Information:

• Item Code: 30crmo4-alloy-steel-bars-30crmo4-round-bars-30crmo4-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar.

 

SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar in size range of 40mm upto 650mm in diameter.

 

Chemical composition of SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar:

 

Equivalent steel number of JIS SNCM220H:

USA SAE / AISI: 8617, 8620, 8620H, 8620RH, G86170, G86200, H86170, H86200, J11442, K12147

Germany DIN,WNr: 1.6523, 21NiCrMo2, 21NiCrMo2-2

Japan JIS: SNCM220, SNCM220H

France AFNOR: 20NCD2, 20NiCrMo2, 22NCD2

England BS: 20NiCrMo2-2, 805H20, 805M20, 806M20

European EN: 1.6523, 20MoCr2-2, 20NiCrMo2, 20NiCrMo2-2, 20NiCrMo2KD

Italy UNI: 20NiCrMo2

Spain UNE: 20NiCrMo2, 20NiCrMo2-2, 20NiCrMo3-1

China GB: 20CrNiMo, 20CrNiMoH, G20CrNiMo

Sweden SS: 2506

Poland PN: 20HNM, 20HNMA

Finland SFS: 21NiCrMo2

Australia AS: 8617, 8617H, 8620, 8620H

South Korea KS: SNCM220, SNCM220H

 

Other possible products of JIS SNCM220H are as follows:

JIS SNCM220H Rods, JIS SNCM220H Blooms, JIS SNCM220H Billets, JIS SNCM220H Bars, JIS SNCM220H Round Bars, JIS SNCM220H Flat Bars, JIS SNCM220H Round Corner Square Bars, JIS SNCM220H RCS Bars, JIS SNCM220H Straight Corner Square Bars, JIS SNCM220H SCS Bars, JIS SNCM220H Square Bars, JIS SNCM220H Rectangular Bars, JIS SNCM220H Hexagonal Bars, JIS SNCM220H Forged Bars, JIS SNCM220H Rolled Bars, JIS SNCM220H Black Bars, JIS SNCM220H Bright Bars, JIS SNCM220H Proof Machined Bars, JIS SNCM220H Hollow Bars, JIS SNCM220H Normalized Bars, JIS SNCM220H Annealed Bars, JIS SNCM220H Hardened (Quenched) Tempered Bars, JIS SNCM220H Blocks, JIS SNCM220H Slabs, JIS SNCM220H Circles, JIS SNCM220H Patta, JIS SNCM220H Forgings, JIS SNCM220H Machined Parts, JIS SNCM220H Shafts.

 

Client can buy smaller quantities of SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar online from our associated manufacturing unit in India at premium cost.

If any requirements for SNCM220H Alloy Steel Bar / SNCM220H Round Bar / SNCM220H Bar kindly do contact us.

Additional Information:

• Item Code: en19a-alloy-steel-bars-en19a-round-bars-en19a-flat-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars/ 20NiCrMo2.

 

Forging of 20NiCrMo2: This alloy is forged at a start temperature of around 2250ºF (1230ºC) and could be forged down to approximately 1700ºF(925ºC.) The alloy is air cooled after forging.

 

Heat Treatment of 20NiCrMo2:

Annealing: For optimum machinabilty, an as-forged structure is normally sufficient for this grade of alloy steel. If this proves not to be the case then an iso-anneal from around 1650ºF (900ºC) to 1225ºF (660ºC) will improve machinability.

 

Normalizing of 20NiCrMo2: 1675ºF (910ºC) and air cool. This is another method of improving machinability in this grade; normalizing might also be used prior to case hardening. 

 

EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars / 20NiCrMo2 can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars / 20NiCrMo2 in size range of 22mm upto 700mm in diameter.

 

Chemical composition of EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars / 20NiCrMo2:

 

Other possible products of 20NiCrMo2 are as follows:

20NiCrMo2 Rods, 20NiCrMo2 Blooms, 20NiCrMo2 Billets, 20NiCrMo2 Bars, 20NiCrMo2 Round Bars, 20NiCrMo2 Flat Bars, 20NiCrMo2 Round Corner Square Bars, 20NiCrMo2 RCS Bars, 20NiCrMo2 Straight Corner Square Bars, 20NiCrMo2 SCS Bars, 20NiCrMo2 Square Bars, 20NiCrMo2 Rectangular Bars, 20NiCrMo2 Hexagonal Bars, 20NiCrMo2 Forged Bars, 20NiCrMo2 Rolled Bars, 20NiCrMo2 Black Bars, 20NiCrMo2 Bright Bars, 20NiCrMo2 Proof Machined Bars, 20NiCrMo2 Hollow Bars, 20NiCrMo2 Normalized Bars, 20NiCrMo2 Annealed Bars, 20NiCrMo2 Hardened (Quenched) Tempered Bars, 20NiCrMo2 Blocks, 20NiCrMo2 Slabs, 20NiCrMo2 Circles, 20NiCrMo2 Patta, 20NiCrMo2 Forgings, 20NiCrMo2 Machined Parts, 20NiCrMo2 Shafts.

 

Client can buy smaller quantities of EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars / 20NiCrMo2 online from our associated manufacturing unit in India at premium cost.

If any requirements for EU EN / UNI / UNE 20NiCrMo2 Alloy Steel Bars / 20NiCrMo2 Round Bars / 20NiCrMo2 kindly do contact us.

Additional Information:

• Item Code: 20nicrmo2-alloy-steel-bars-20nicrmo2-round-bars-20nicrmo2
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars.

 

UNE 40CrMo4 has good machinability. Operations such as turning, hobbing, drilling, sawing, broaching, tapping and milling can be easily performed using the recommendations provided by the machine's manufacturer for ideal tool type-feeds and speeds. UNE 40CrMo4 is difficult to weld, but welding can be performed using any of the common welding practices. Welding can be done by preheating the section and ensuring that stress relieving takes place after welding.

 

Equivalent steel number of 40CrMo4:

EU EN: 42CrMo4

USA SAE / AISI: 4140, 4142

Germany DIN,WNr: 1.7225, 42CrMo4

Japan JIS: SCM440H

France AFNOR: 42CD4

England BS: 708M40, CFS11

Italy UNI: 42CrMo4

Spain UNE: 40CrMo4, F1252

China GB: 42CrMo

Sweden SS: 2244

Finland SFS: 42CrMo4

Russia Gost: 35KHM, 38KHM

Inter ISO: 42CrMo4

 

40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars in size range of 3mm upto 400mm in diameter.

 

Chemical composition of 40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars:

Element: Percentage

 

Other possible products of 40CrMo4 are as follows:

40CrMo4 Rods, 40CrMo4 Blooms, 40CrMo4 Billets, 40CrMo4 Bars, 40CrMo4 Round Bars, 40CrMo4 Flat Bars, 40CrMo4 Round Corner Square Bars, 40CrMo4 RCS Bars, 40CrMo4 Straight Corner Square Bars, 40CrMo4 SCS Bars, 40CrMo4 Square Bars, 40CrMo4 Rectangular Bars, 40CrMo4 Hexagonal Bars, 40CrMo4 Forged Bars, 40CrMo4 Rolled Bars, 40CrMo4 Black Bars, 40CrMo4 Bright Bars, 40CrMo4 Proof Machined Bars, 40CrMo4 Hollow Bars, 40CrMo4 Normalized Bars, 40CrMo4 Annealed Bars, 40CrMo4 Hardened (Quenched) Tempered Bars, 40CrMo4 Blocks, 40CrMo4 Slabs, 40CrMo4 Circles, 40CrMo4 Patta, 40CrMo4 Forgings, 40CrMo4 Machined Parts, 40CrMo4 Shafts.

 

Client can buy smaller quantities of 40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 40CrMo4 Alloy Steel Bars, 40CrMo4 Round Bars, 40CrMo4 Bars kindly do contact us.

Additional Information:

• Item Code: 40crmo4-alloy-steel-bars-40crmo4-round-bars-40crmo4-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars.

 

EN19A is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally  supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T). EN19A is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.

Pre hardened and tempered EN19A can be further surface hardened by flame or induction hardening and by nitriding.

EN19A is used extensively in most industry sectors for a wide range of applications such as:

Adapters, Arbors, Axle Shafts, Bolts, Crankshafts, Connection Rods, Chuck Bodies, Collets, Conveyor Pins Rolls, Ejector Pins, Forks, Gears, Guide Rods, Hydraulic Shafts Parts,Lathe Spindles, Logging Parts, Milling Spindles, Motor Shafts, Nuts, Pinch Bars, Pins Various, Pinions, Pump Shafts, Rams, Sockets, Spindles, Sprockets, Studs, Tool Holders, Torsion Bars, Worms etc..

 

EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars in size range of 10mm upto 1000mm in diameter.

 

Chemical composition of EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars:

Element: Percentage

Carbon: 0.36 - 0.44

Silicon: 0.10 - 0.40

Manganese: 0.65 - 1.10

Chromium: 0.75 - 1.20

Molybdenum: 0.15 - 0.35

Phosphorous: 0 - 0.04

Sulphur: 0 - 0.04

 

Other possible products of EN19A are as follows:

EN19A Rods, EN19A Blooms, EN19A Billets, EN19A Bars, EN19A Round Bars, EN19A Flat Bars, EN19A Round Corner Square Bars, EN19A RCS Bars, EN19A Straight Corner Square Bars, EN19A SCS Bars, EN19A Square Bars, EN19A Rectangular Bars, EN19A Hexagonal Bars, EN19A Forged Bars, EN19A Rolled Bars, EN19A Black Bars, EN19A Bright Bars, EN19A Proof Machined Bars, EN19A Hollow Bars, EN19A Normalized Bars, EN19A Annealed Bars, EN19A Hardened (Quenched) Tempered Bars, EN19A Blocks, EN19A Slabs, EN19A Circles, EN19A Patta, EN19A Forgings, EN19A Machined Parts, EN19A Shafts.

 

Client can buy smaller quantities of EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for EN19A Alloy Steel Bars, EN19A Round Bars, EN19A Flat Bars kindly do contact us.

Additional Information:

• Item Code: sncm220h-alloy-steel-bar-sncm220h-round-bar-sncm220h-bar
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars.   JIS SCM430 steel commonly referred to as chromoly is a chrome alloy steel with medium carbon content containing .80 – 1.10% chromium as the strengthening agent.  SCM430 coils and sheets is readily machinable has excellent weldability and offers excellent ductility.  SCM430 steel sheet is considerably stronger and harder than other standard steel grades and is commonly used in construction of commercial and military aircraft.   SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.   Size Specifications: Can offer SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars in size range of 25mm upto 450mm in diameter.   Chemical composition of SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars: Element: Percentage Fe: Balance Cr: 0.80-1.10% Mn: 0.40-0.60% C: 0.28-0.33% Si: 0.15%-0.30% Mo: 0.15-0.25% S: 0.040% max P: 0.035% max   Other possible products of JIS SCM430 are as follows: JIS SCM430 Rods, JIS SCM430 Blooms, JIS SCM430 Billets, JIS SCM430 Bars, JIS SCM430 Round Bars, JIS SCM430 Flat Bars, JIS SCM430 Round Corner Square Bars, JIS SCM430 RCS Bars, JIS SCM430 Straight Corner Square Bars, JIS SCM430 SCS Bars, JIS SCM430 Square Bars, JIS SCM430 Rectangular Bars, JIS SCM430 Hexagonal Bars, JIS SCM430 Forged Bars, JIS SCM430 Rolled Bars, JIS SCM430 Black Bars, JIS SCM430 Bright Bars, JIS SCM430 Proof Machined Bars, JIS SCM430 Hollow Bars, JIS SCM430 Normalized Bars, JIS SCM430 Annealed Bars, JIS SCM430 Hardened (Quenched) Tempered Bars, JIS SCM430 Blocks, JIS SCM430 Slabs, JIS SCM430 Circles, JIS SCM430 Patta, JIS SCM430 Flanges, JIS SCM430 Slip-On Flanges, JIS SCM430 Weld Neck Flanges, JIS SCM430 Blind Flanges, JIS SCM430 Socket Weld Flanges, JIS SCM430 Threaded Flanges, JIS SCM430 Lap Joint Flanges, JIS SCM430 Long Welding Neck Flanges, JIS SCM430 Plate Flanges, JIS SCM430 Raised Face Flanges, JIS SCM430 Flat Face Flanges, JIS SCM430 Ring Type Joint Flanges, JIS SCM430 RF Flanges, JIS SCM430 FF Flanges, JIS SCM430 RTJ Flanges, JIS SCM430 Plates, JIS SCM430 Custom Profiles, JIS SCM430 Plate Shapes, JIS SCM430 Fitting, JIS SCM430 Elbow, JIS SCM430 45 Degree Elbow, JIS SCM430 90 Degree Elbow, JIS SCM430 180 Degree Elbow, JIS SCM430 Reducer, JIS SCM430 Eccentric Reducer, JIS SCM430 Concentric Reducer, JIS SCM430 Sleeve, JIS SCM430 Union, JIS SCM430 Forgings, JIS SCM430 Machined Parts, JIS SCM430 Shafts, JIS SCM430 Tube, JIS SCM430 Tubing, JIS SCM430 Pipes, JIS SCM430 Seamless Tube, JIS SCM430 Seamless Tubing, JIS SCM430 Seamless Pipes.   Client can buy smaller quantities of SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars online from our associated manufacturing unit in India at premium cost. If any requirements for SCM430 Alloy Steel Bars, SCM430 Round Bars, SCM430 Bars kindly do contact us.

Additional Information:

• Item Code: scm430-alloy-steel-bars-scm430-round-bars-scm430-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars.

 

JIS SCM420 alloy steel is a medium carbon, low alloy steel. Also commonly referred to as a chromoly steel, or chrome moly steel, containing nominally 0.28-0.33% Carbon, 0.8-1.1% Chromium and 0.15-0.25% Molybdenum. It is similar to 4140 steel which has a higher carbon level (0.28-0.33%), giving SCM420 material improved weldability, at the expense of through thickness strength.

 

SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars in size range of 26mm upto 600mm in diameter.

 

Chemical composition of SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars:

 

Other possible products of JIS SCM420 are as follows:

JIS SCM420 Rods, JIS SCM420 Blooms, JIS SCM420 Billets, JIS SCM420 Bars, JIS SCM420 Round Bars, JIS SCM420 Flat Bars, JIS SCM420 Round Corner Square Bars, JIS SCM420 RCS Bars, JIS SCM420 Straight Corner Square Bars, JIS SCM420 SCS Bars, JIS SCM420 Square Bars, JIS SCM420 Rectangular Bars, JIS SCM420 Hexagonal Bars, JIS SCM420 Forged Bars, JIS SCM420 Rolled Bars, JIS SCM420 Black Bars, JIS SCM420 Bright Bars, JIS SCM420 Proof Machined Bars, JIS SCM420 Hollow Bars, JIS SCM420 Normalized Bars, JIS SCM420 Annealed Bars, JIS SCM420 Hardened (Quenched) Tempered Bars, JIS SCM420 Blocks, JIS SCM420 Slabs, JIS SCM420 Circles, JIS SCM420 Patta, JIS SCM420 Flanges, JIS SCM420 Slip-On Flanges, JIS SCM420 Weld Neck Flanges, JIS SCM420 Blind Flanges, JIS SCM420 Socket Weld Flanges, JIS SCM420 Threaded Flanges, JIS SCM420 Lap Joint Flanges, JIS SCM420 Long Welding Neck Flanges, JIS SCM420 Plate Flanges, JIS SCM420 Raised Face Flanges, JIS SCM420 Flat Face Flanges, JIS SCM420 Ring Type Joint Flanges, JIS SCM420 RF Flanges, JIS SCM420 FF Flanges, JIS SCM420 RTJ Flanges, JIS SCM420 Plates, JIS SCM420 Custom Profiles, JIS SCM420 Plate Shapes, JIS SCM420 Fitting, JIS SCM420 Elbow, JIS SCM420 45 Degree Elbow, JIS SCM420 90 Degree Elbow, JIS SCM420 180 Degree Elbow, JIS SCM420 Reducer, JIS SCM420 Eccentric Reducer, JIS SCM420 Concentric Reducer, JIS SCM420 Sleeve, JIS SCM420 Union, JIS SCM420 Forgings, JIS SCM420 Machined Parts, JIS SCM420 Shafts, JIS SCM420 Tube, JIS SCM420 Tubing, JIS SCM420 Pipes, JIS SCM420 Seamless Tube, JIS SCM420 Seamless Tubing, JIS SCM420 Seamless Pipes.

 

Client can buy smaller quantities of SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for SCM420 Alloy Steel Bars / SCM420 Round Bars / SCM420 Bars kindly do contact us.

Additional Information:

• Item Code: scm420-alloy-steel-bars-scm420-round-bars-scm420-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar.

 

DIN 1.7225 is versatile because of its simple chemistry and has the following composition:

0.40 % carbon and 0.85 % manganese which offers toughness and can be heat treated and hardened 0.1 % chromium adds to overall toughness but is not enough to be made into stainless steel

0.25 % molybdenum and small amounts of sulfur, silicon and phosphorous

 

DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar in size range of 22mm upto 600mm in diameter.

 

Chemical composition of DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar:

Element: Percentage

 

Other possible products of DIN 1.7225 are as follows:

DIN 1.7225 Rods, DIN 1.7225 Blooms, DIN 1.7225 Billets, DIN 1.7225 Bars, DIN 1.7225 Round Bars, DIN 1.7225 Flat Bars, DIN 1.7225 Round Corner Square Bars, DIN 1.7225 RCS Bars, DIN 1.7225 Straight Corner Square Bars, DIN 1.7225 SCS Bars, DIN 1.7225 Square Bars, DIN 1.7225 Rectangular Bars, DIN 1.7225 Hexagonal Bars, DIN 1.7225 Forged Bars, DIN 1.7225 Rolled Bars, DIN 1.7225 Black Bars, DIN 1.7225 Bright Bars, DIN 1.7225 Proof Machined Bars, DIN 1.7225 Hollow Bars, DIN 1.7225 Normalized Bars, DIN 1.7225 Annealed Bars, DIN 1.7225 Hardened (Quenched) Tempered Bars, DIN 1.7225 Blocks, DIN 1.7225 Slabs, DIN 1.7225 Circles, DIN 1.7225 Patta, DIN 1.7225 Forgings, DIN 1.7225 Machined Parts, DIN 1.7225 Shafts.

 

Client can buy smaller quantities of DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar online from our associated manufacturing unit in India at premium cost.

If any requirements for DIN 1.7225 Alloy Steel Bars / 1.7225 Round Bars / 1.7225 Bar kindly do contact us.

Additional Information:

• Item Code: din-17225-alloy-steel-bars-17225-round-bars-17225-bar
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer AFNOR 42CD4 Alloy Steel Bars / 42CD4 Round Bars / 42CD4 Flat Bars.

 

AFNOR 42CD4 is used extensively in most industry sectors for a wide range of applications such as:

Strippers, tool bodies, stubs, machinery parts and components, connecting rods, ejectors, boring bars, axles, logging parts, conveyor pins rolls, jigs, ways, hydraulic machinery shafts, studs, guide rods, drill collars, forming dies, chain links, adapters, logging parts, milling spindles, pins, pump shafts, worms, bolts, bolsters, crankshafts, mold bases, tie rods, reamer bodies, crow bars, collets, fixtures, tracks, rams, sprockets, forks, cams, wear strips or parts, sprockets, ring gears, lathe spindles, valves, trim dies, motor shafts, pinions, tool holders, axle shafts, holder blocks, tool holders, couplings, conveyor parts, chuck bodies, back up and support tooling, guides, piston rods, shafts, ejector pins, molds, slides, gears, pump shafts, torsion bars, gear racks, brake dies, spindles, arbors, pinch bars, nuts, sockets

 

AFNOR 42CD4 Alloy Steel Bars / 42CD4 Round Bars / 42CD4 Flat Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer AFNOR 42CD4 Alloy Steel Bars / 42CD4 Round Bars / 42CD4 Flat Bars in size range of 22mm upto 400mm in diameter.

 

Equivalent steel number of 42CD4:

EU EN: 42CrMo4

USA SAE / AISI: 4140, 4142

Germany DIN,WNr: 1.7225, 42CrMo4

Japan JIS: SCM440H

France AFNOR: 42CD4

England BS: 708M40, CFS11

Italy UNI: 42CrMo4

Spain UNE: 40CrMo4, F1252

China GB: 42CrMo

Sweden SS: 2244

Finland SFS: 42CrMo4

Russia Gost: 35KHM, 38KHM

Inter ISO: 42CrMo4

 

Other possible products of AFNOR 42CD4 are as follows:

AFNOR 42CD4 Rods, AFNOR 42CD4 Blooms, AFNOR 42CD4 Billets, AFNOR 42CD4 Bars, AFNOR 42CD4 Round Bars, AFNOR 42CD4 Flat Bars, AFNOR 42CD4 Round Corner Square Bars, AFNOR 42CD4 RCS Bars, AFNOR 42CD4 Straight Corner Square Bars, AFNOR 42CD4 SCS Bars, AFNOR 42CD4 Square Bars, AFNOR 42CD4 Rectangular Bars, AFNOR 42CD4 Hexagonal Bars, AFNOR 42CD4 Forged Bars, AFNOR 42CD4 Rolled Bars, AFNOR 42CD4 Black Bars, AFNOR 42CD4 Bright Bars, AFNOR 42CD4 Proof Machined Bars, AFNOR 42CD4 Hollow Bars, AFNOR 42CD4 Normalized Bars, AFNOR 42CD4 Annealed Bars, AFNOR 42CD4 Hardened (Quenched) Tempered Bars, AFNOR 42CD4 Blocks, AFNOR 42CD4 Slabs, AFNOR 42CD4 Circles, AFNOR 42CD4 Patta, AFNOR 42CD4 Forgings, AFNOR 42CD4 Machined Parts, AFNOR 42CD4 Shafts.

 

Client can buy smaller quantities of AFNOR 42CD4 Alloy Steel Bars / 42CD4 Round Bars / 42CD4 Flat Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for AFNOR 42CD4 Alloy Steel Bars / 42CD4 Round Bars / 42CD4 Flat Bars kindly do contact us.

Additional Information:

• Item Code: 42cd4-alloy-steel-bars-42cd4-round-bars-42cd4-flat-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars.

SNCM439 alloy steel can be machined using all conventional techniques. Machining process can be performed in the annealed or normalized and tempered conditions. SNCM439 alloy steel is mainly used in power transmission gears and shafts, aircraft landing gear, and other structural parts.

 

SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars in size range of 30mm upto 550mm in diameter.

 

Chemical composition of SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars:

Element: Percentage

Nickel, Ni: 1.65 - 2.00

Chromium, Cr: 0.700 - 0.900

Manganese, Mn: 0.600 - 0.800

Carbon, C: 0.370 - 0.430

Molybdenum, Mo: 0.200 - 0.300

Silicon, Si: 0.150 - 0.300

Sulfur, S: 0.0400

Phosphorous, P: 0.0350

 

Other possible products of JIS SNCM439 are as follows:

JIS SNCM439 Rods, JIS SNCM439 Blooms, JIS SNCM439 Billets, JIS SNCM439 Bars, JIS SNCM439 Round Bars, JIS SNCM439 Flat Bars, JIS SNCM439 Round Corner Square Bars, JIS SNCM439 RCS Bars, JIS SNCM439 Straight Corner Square Bars, JIS SNCM439 SCS Bars, JIS SNCM439 Square Bars, JIS SNCM439 Rectangular Bars, JIS SNCM439 Hexagonal Bars, JIS SNCM439 Forged Bars, JIS SNCM439 Rolled Bars, JIS SNCM439 Black Bars, JIS SNCM439 Bright Bars, JIS SNCM439 Proof Machined Bars, JIS SNCM439 Hollow Bars, JIS SNCM439 Normalized Bars, JIS SNCM439 Annealed Bars, JIS SNCM439 Hardened (Quenched) Tempered Bars, JIS SNCM439 Blocks, JIS SNCM439 Slabs, JIS SNCM439 Circles, JIS SNCM439 Patta, JIS SNCM439 Forgings, JIS SNCM439 Machined Parts, JIS SNCM439 Shafts.

 

Client can buy smaller quantities of SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for SNCM439 Alloy Steel Bars / SNCM439 Round Bars / SNCM439 Bars kindlydo contact us.

Additional Information:

• Item Code: en24-alloy-steel-bars-en-round-bars-en24-flat-bars
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer 25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars.

 

25CrMo4 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased. Forming of 25CrMo4 steel can be performed in the annealed condition. Welding of 25CrMo4 steel can be performed by all commercial methods.

 

25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer 25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars in size range of 22mm upto 920mm in diameter.

 

Chemical composition of 25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars:

Element: Percentage

Fe: Balance

Cr: 0.80-1.10%

Mn: 0.40-0.60%

C: 0.28-0.33%

Si: 0.15%-0.30%

Mo: 0.15-0.25%

S: 0.040%

P: 0.035%

 

Other possible products of 25CrMo4 are as follows:

25CrMo4 Rods, 25CrMo4 Blooms, 25CrMo4 Billets, 25CrMo4 Bars, 25CrMo4 Round Bars, 25CrMo4 Flat Bars, 25CrMo4 Round Corner Square Bars, 25CrMo4 RCS Bars, 25CrMo4 Straight Corner Square Bars, 25CrMo4 SCS Bars, 25CrMo4 Square Bars, 25CrMo4 Rectangular Bars, 25CrMo4 Hexagonal Bars, 25CrMo4 Forged Bars, 25CrMo4 Rolled Bars, 25CrMo4 Black Bars, 25CrMo4 Bright Bars, 25CrMo4 Proof Machined Bars, 25CrMo4 Hollow Bars, 25CrMo4 Normalized Bars, 25CrMo4 Annealed Bars, 25CrMo4 Hardened (Quenched) Tempered Bars, 25CrMo4 Blocks, 25CrMo4 Slabs, 25CrMo4 Circles, 25CrMo4 Patta, 25CrMo4 Flanges, 25CrMo4 Slip-On Flanges, 25CrMo4 Weld Neck Flanges, 25CrMo4 Blind Flanges, 25CrMo4 Socket Weld Flanges, 25CrMo4 Threaded Flanges, 25CrMo4 Lap Joint Flanges, 25CrMo4 Long Welding Neck Flanges, 25CrMo4 Plate Flanges, 25CrMo4 Raised Face Flanges, 25CrMo4 Flat Face Flanges, 25CrMo4 Ring Type Joint Flanges, 25CrMo4 RF Flanges, 25CrMo4 FF Flanges, 25CrMo4 RTJ Flanges, 25CrMo4 Plates, 25CrMo4 Custom Profiles, 25CrMo4 Plate Shapes, 25CrMo4 Fitting, 25CrMo4 Elbow, 25CrMo4 45 Degree Elbow, 25CrMo4 90 Degree Elbow, 25CrMo4 180 Degree Elbow, 25CrMo4 Reducer, 25CrMo4 Eccentric Reducer, 25CrMo4 Concentric Reducer, 25CrMo4 Sleeve, 25CrMo4 Union, 25CrMo4 Forgings, 25CrMo4 Machined Parts, 25CrMo4 Shafts, 25CrMo4 Tube, 25CrMo4 Tubing, 25CrMo4 Pipes, 25CrMo4 Seamless Tube, 25CrMo4 Seamless Tubing, 25CrMo4 Seamless Pipes.

 

Client can buy smaller quantities of 25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars online from our associated manufacturing unit in India at premium cost.

If any requirements for 25CrMo4 Alloy Steel Bars / 25CrMo4 Round Bars / 25CrMo4 Bars kindly do contact us.

Additional Information:

• Item Code: 25crmo4-alloy-steel-bars-25crmo4-round-bars-25crmo4-bars
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

Tradewell Ferromet Pvt Ltd, Khopoli, Mumbai, Maharashtra, India can offer DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar.

 

DIN 1.6565 steel has better penetration of quench than 39CrNiMo3, it’s used for components with a lot of stresses, shafts, axles, engineering nut and fasteners, etc. Material 1.6565 is also used for highly stressed components in mechanical engineering, vehicle construction as well as aerospace industry. DIN 1.6565 - only limited welding is possible.

Machinability: 5 (1 = low - 10 = good)

 

DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar can be avail as rolled, forged in annealed condition with black or bright (peeled or proof machined) finish.

 

Size Specifications: Can offer DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar in size range of 3mm upto 400mm in diameter.

 

Chemical composition of DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar:

C: 0.38-0.43

Mn: 0.60-0.80

P: 0.035 (max)

S: 0.04 (max)

Si: 0.15-0.30

Cr: 0.70-0.90

Ni: 1.65-2.00

Mo: 0.20-0.30

 

Other possible products of DIN 1.6565 are as follows:

DIN 1.6565 Rods, DIN 1.6565 Blooms, DIN 1.6565 Billets, DIN 1.6565 Bars, DIN 1.6565 Round Bars, DIN 1.6565 Flat Bars, DIN 1.6565 Round Corner Square Bars, DIN 1.6565 RCS Bars, DIN 1.6565 Straight Corner Square Bars, DIN 1.6565 SCS Bars, DIN 1.6565 Square Bars, DIN 1.6565 Rectangular Bars, DIN 1.6565 Hexagonal Bars, DIN 1.6565 Forged Bars, DIN 1.6565 Rolled Bars, DIN 1.6565 Black Bars, DIN 1.6565 Bright Bars, DIN 1.6565 Proof Machined Bars, DIN 1.6565 Hollow Bars, DIN 1.6565 Normalized Bars, DIN 1.6565 Annealed Bars, DIN 1.6565 Hardened (Quenched) Tempered Bars, DIN 1.6565 Blocks, DIN 1.6565 Slabs, DIN 1.6565 Circles, DIN 1.6565 Patta, DIN 1.6565 Forgings, DIN 1.6565 Machined Parts, DIN 1.6565 Shafts.

 

Client can buy smaller quantities of DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar online from our associated manufacturing unit in India at premium cost.

If any requirements for DIN 1.6565 Alloy Steel Bars / 1.6565 Round Bars / 1.6565 Bar kindly do contact us.

Additional Information:

• Item Code: din-16565-alloy-steel-bars-16565-round-bars-16565-bar
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Nhavasheva, Maharashtra, Khopoli, Mumbai, India
• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Product Details:

We are engaged in manufacturing and supplying of the one of finest quality of Lead And Metal Products. Our team of highly experienced engineers and technicians oversees each and every stage of production of these metals. We follow all stringent quality tests to make sure that our customers get only the best products. Some of the available metals are Commercial Lead (with 98% purity), Pure Lead Alloys (99.97% purity) and Lead Alloys as per customer specific requirements (with test certificates).